基于最大功率跟踪器的太阳能光伏阵列无刷直流电机MATLAB仿真

2019 International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST) Pub Date : 2019-01-01 DOI:10.1109/ICREST.2019.8644339

M. Fahmida, Md. Samiul Alam, M. Hoque

{"title":"基于最大功率跟踪器的太阳能光伏阵列无刷直流电机MATLAB仿真","authors":"M. Fahmida, Md. Samiul Alam, M. Hoque","doi":"10.1109/ICREST.2019.8644339","DOIUrl":null,"url":null,"abstract":"The main objective of the paper is that it deals with the designing of a Photovoltaic array connected to a Brushless DC (BLDC) motor using an easy and feasible Maximum Power Point Tracking (MPPT) algorithm. At present, Photovoltaic energy is one of the most vital energy resources in electrical power applications around the world. It is essential to operate the Photovoltaic (PV) system at the Maximum Power Point (MPP) so that maximum power can be secured from the solar panel because the output power from the PV arrays is sensitive to temperature changes and solar irradiance. In this paper, the Perturb and Observe (P&O) algorithm, a buck converter and a three phase inverter are used which are modelled in Simulink tool of MATLAB.","PeriodicalId":108842,"journal":{"name":"2019 International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST)","volume":"119 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"MATLAB Simscape Simulation of Solar Photovoltaic array fed BLDC Motor using Maximum Power Point Tracker\",\"authors\":\"M. Fahmida, Md. Samiul Alam, M. Hoque\",\"doi\":\"10.1109/ICREST.2019.8644339\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The main objective of the paper is that it deals with the designing of a Photovoltaic array connected to a Brushless DC (BLDC) motor using an easy and feasible Maximum Power Point Tracking (MPPT) algorithm. At present, Photovoltaic energy is one of the most vital energy resources in electrical power applications around the world. It is essential to operate the Photovoltaic (PV) system at the Maximum Power Point (MPP) so that maximum power can be secured from the solar panel because the output power from the PV arrays is sensitive to temperature changes and solar irradiance. In this paper, the Perturb and Observe (P&O) algorithm, a buck converter and a three phase inverter are used which are modelled in Simulink tool of MATLAB.\",\"PeriodicalId\":108842,\"journal\":{\"name\":\"2019 International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST)\",\"volume\":\"119 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2019 International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICREST.2019.8644339\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2019 International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICREST.2019.8644339","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 6

摘要

本文的主要目的是利用一种简单可行的最大功率点跟踪(MPPT)算法来设计与无刷直流(BLDC)电机相连的光伏阵列。目前，光伏能源是世界范围内电力应用中最重要的能源之一。由于光伏阵列的输出功率对温度变化和太阳辐照度很敏感，因此必须在最大功率点(MPP)运行光伏(PV)系统，以便从太阳能电池板获得最大功率。本文采用了扰动与观察(P&O)算法、降压变换器和三相逆变器，并在MATLAB的Simulink工具中进行了建模。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

MATLAB Simscape Simulation of Solar Photovoltaic array fed BLDC Motor using Maximum Power Point Tracker

The main objective of the paper is that it deals with the designing of a Photovoltaic array connected to a Brushless DC (BLDC) motor using an easy and feasible Maximum Power Point Tracking (MPPT) algorithm. At present, Photovoltaic energy is one of the most vital energy resources in electrical power applications around the world. It is essential to operate the Photovoltaic (PV) system at the Maximum Power Point (MPP) so that maximum power can be secured from the solar panel because the output power from the PV arrays is sensitive to temperature changes and solar irradiance. In this paper, the Perturb and Observe (P&O) algorithm, a buck converter and a three phase inverter are used which are modelled in Simulink tool of MATLAB.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2019 International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST)

自引率

0.00%

发文量