M. Kadota, Y. Yunoki, T. Shimatsu, Miyuki Uomot, Shuji Tanaka
{"title":"LiTaO3-on-Quartz结构HAL SAW谐振器的近零TCF","authors":"M. Kadota, Y. Yunoki, T. Shimatsu, Miyuki Uomot, Shuji Tanaka","doi":"10.1109/FCS.2018.8597496","DOIUrl":null,"url":null,"abstract":"This paper reports the recent progress of a new type of hetero acoustic layer (HAL) surface acoustic wave (SAW) resonators using a $0.44 \\text{to} 1.12 \\mu \\mathrm{m}$ thick rotated-Y LiTa03 (LT) plate and a near ST-cut quartz substrate. This material combination was selected, because quartz has a higher velocity of leaky SAW than LT and a positive temperature coefficient of frequency (TCF). An impedance ratio of 82 dB and a Bode Q of 3, 000 were obtained, and TCFs at series and parallel resonance were measured to be +2 and −10 ppm/PC, respectively. Compared with the characteristics of a standard 42°YX LT SAW resonator fabricated in the same facility, the impedance ratio is higher by 31 dB, the bode Q is 6.3 times higher, and the TCFs at series and parallel resonance are as small as 1/25 and 1/6, respectively.","PeriodicalId":180164,"journal":{"name":"2018 IEEE International Frequency Control Symposium (IFCS)","volume":"128 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"14","resultStr":"{\"title\":\"Near-Zero TCF of HAL SAW Resonator with LiTaO3-on-Quartz Structure\",\"authors\":\"M. Kadota, Y. Yunoki, T. Shimatsu, Miyuki Uomot, Shuji Tanaka\",\"doi\":\"10.1109/FCS.2018.8597496\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper reports the recent progress of a new type of hetero acoustic layer (HAL) surface acoustic wave (SAW) resonators using a $0.44 \\\\text{to} 1.12 \\\\mu \\\\mathrm{m}$ thick rotated-Y LiTa03 (LT) plate and a near ST-cut quartz substrate. This material combination was selected, because quartz has a higher velocity of leaky SAW than LT and a positive temperature coefficient of frequency (TCF). An impedance ratio of 82 dB and a Bode Q of 3, 000 were obtained, and TCFs at series and parallel resonance were measured to be +2 and −10 ppm/PC, respectively. Compared with the characteristics of a standard 42°YX LT SAW resonator fabricated in the same facility, the impedance ratio is higher by 31 dB, the bode Q is 6.3 times higher, and the TCFs at series and parallel resonance are as small as 1/25 and 1/6, respectively.\",\"PeriodicalId\":180164,\"journal\":{\"name\":\"2018 IEEE International Frequency Control Symposium (IFCS)\",\"volume\":\"128 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-05-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"14\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 IEEE International Frequency Control Symposium (IFCS)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/FCS.2018.8597496\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 IEEE International Frequency Control Symposium (IFCS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/FCS.2018.8597496","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Near-Zero TCF of HAL SAW Resonator with LiTaO3-on-Quartz Structure
This paper reports the recent progress of a new type of hetero acoustic layer (HAL) surface acoustic wave (SAW) resonators using a $0.44 \text{to} 1.12 \mu \mathrm{m}$ thick rotated-Y LiTa03 (LT) plate and a near ST-cut quartz substrate. This material combination was selected, because quartz has a higher velocity of leaky SAW than LT and a positive temperature coefficient of frequency (TCF). An impedance ratio of 82 dB and a Bode Q of 3, 000 were obtained, and TCFs at series and parallel resonance were measured to be +2 and −10 ppm/PC, respectively. Compared with the characteristics of a standard 42°YX LT SAW resonator fabricated in the same facility, the impedance ratio is higher by 31 dB, the bode Q is 6.3 times higher, and the TCFs at series and parallel resonance are as small as 1/25 and 1/6, respectively.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
