{"title":"一种具有主动解耦和集成功率优化器的离网双相输出4腿逆变器","authors":"Sinan A. Sabeeh Al-Obaidi, K. Hodge, P. Enjeti","doi":"10.1109/PEDG.2018.8447594","DOIUrl":null,"url":null,"abstract":"This paper presents an active decoupling technique for a dual phase output inverter with an integrated power optimizer for off-grid applications. The proposed method employs a half bridge with passive elements (L-C) to balance the output and actively compensate for twice the frequency power ripple in the dc-link, The closed loop control adjusts for varying load conditions. Further, an integrated power optimizer (PO) provides interface of solar-pv and battery to the dc-link, The PO stage (half bridge) is controlled such that maximum power point tracking (MPPT) is achieved for the connected pv-array and independent charge/discharge functions of the battery. Simulation and experimental results verify the performance of the proposed technique under balanced, unbalanced load, non-linear conditions as well as fault condition.","PeriodicalId":101582,"journal":{"name":"2018 9th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG)","volume":"70 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"A Dual-Phase Output 4-Leg Inverter with Active Decoupling and Integrated Power Optimizer for Off-Grid Applications\",\"authors\":\"Sinan A. Sabeeh Al-Obaidi, K. Hodge, P. Enjeti\",\"doi\":\"10.1109/PEDG.2018.8447594\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents an active decoupling technique for a dual phase output inverter with an integrated power optimizer for off-grid applications. The proposed method employs a half bridge with passive elements (L-C) to balance the output and actively compensate for twice the frequency power ripple in the dc-link, The closed loop control adjusts for varying load conditions. Further, an integrated power optimizer (PO) provides interface of solar-pv and battery to the dc-link, The PO stage (half bridge) is controlled such that maximum power point tracking (MPPT) is achieved for the connected pv-array and independent charge/discharge functions of the battery. Simulation and experimental results verify the performance of the proposed technique under balanced, unbalanced load, non-linear conditions as well as fault condition.\",\"PeriodicalId\":101582,\"journal\":{\"name\":\"2018 9th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG)\",\"volume\":\"70 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-06-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 9th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/PEDG.2018.8447594\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 9th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PEDG.2018.8447594","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
A Dual-Phase Output 4-Leg Inverter with Active Decoupling and Integrated Power Optimizer for Off-Grid Applications
This paper presents an active decoupling technique for a dual phase output inverter with an integrated power optimizer for off-grid applications. The proposed method employs a half bridge with passive elements (L-C) to balance the output and actively compensate for twice the frequency power ripple in the dc-link, The closed loop control adjusts for varying load conditions. Further, an integrated power optimizer (PO) provides interface of solar-pv and battery to the dc-link, The PO stage (half bridge) is controlled such that maximum power point tracking (MPPT) is achieved for the connected pv-array and independent charge/discharge functions of the battery. Simulation and experimental results verify the performance of the proposed technique under balanced, unbalanced load, non-linear conditions as well as fault condition.