Characterization Process of Silicon Solar Cell in BAEC Lab

This paper represents the characterization process of mono-facial solar cell in Bangladesh Atomic Energy Commission (BAEC) Lab. Mono-facial solar cell characterization performance analysis using surface reflection method, Sheet resistance method, SEM, Surface photo voltage and LIV test. The morphology of silicon wafer surface has been studied using scanning electron microscopy. It is found that the pyramid type structures are formed on the textured surface which helps to trap more light during conversion to electricity. The sheet resistance of raw and diffused sample is measured by using four point probe method. Results show that the resistivity of the wafer is decreased after diffusion which indicates the formation of n-type layer during diffusion process. The surface photo voltage data is used to find the diffusion length and life time. It is found the diffusion length 81.5μm and life time is 2.5μs. Finally, the efficiency of monofacial solar cell measured by LIV tester. Results show that the monofacial solar cell achieved fill factor (FF) of 0.310423 with a conversion efficiency (η) of 5.193843% where the active surface area is 96 cm2.