旋转速度和运动的电磁非接触测量方法

2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT) Pub Date : 2018-05-01 DOI:10.1109/USBEREIT.2018.8384600

K. Shaidurov, S. Polyakov

{"title":"旋转速度和运动的电磁非接触测量方法","authors":"K. Shaidurov, S. Polyakov","doi":"10.1109/USBEREIT.2018.8384600","DOIUrl":null,"url":null,"abstract":"The paper deal with a new measurement method for rotation speed and movements of shafts using non-contact eddy current sensors. The main advantages and shortcomings of this method are considered. The prospects of use of this method for various practical applications are analyzed. Special attention in the work is paid to errors of measurements that arise during the using of this technique and resistance of this method to impact of noise. Possible paths for improvement of characteristics of this method are presented. Now proposed method assumes determination of rotation speed with inaccuracy about 0.1 RPM and the space provision of a shaft with inaccuracy of 0.1 mm when using only one sensor.","PeriodicalId":176222,"journal":{"name":"2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Electromagnetic non-contact measurement method for rotation speed and movements\",\"authors\":\"K. Shaidurov, S. Polyakov\",\"doi\":\"10.1109/USBEREIT.2018.8384600\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper deal with a new measurement method for rotation speed and movements of shafts using non-contact eddy current sensors. The main advantages and shortcomings of this method are considered. The prospects of use of this method for various practical applications are analyzed. Special attention in the work is paid to errors of measurements that arise during the using of this technique and resistance of this method to impact of noise. Possible paths for improvement of characteristics of this method are presented. Now proposed method assumes determination of rotation speed with inaccuracy about 0.1 RPM and the space provision of a shaft with inaccuracy of 0.1 mm when using only one sensor.\",\"PeriodicalId\":176222,\"journal\":{\"name\":\"2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT)\",\"volume\":\"20 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-05-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/USBEREIT.2018.8384600\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/USBEREIT.2018.8384600","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文提出了一种利用非接触式涡流传感器测量轴转速和运动的新方法。分析了该方法的主要优点和不足。分析了该方法在各种实际应用中的应用前景。在工作中特别注意在使用该技术期间产生的测量误差和该方法对噪声影响的抵抗力。提出了改进该方法特性的可能途径。现在提出的方法假设仅使用一个传感器时，转速误差约为0.1 RPM，轴的空间提供误差为0.1 mm。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Electromagnetic non-contact measurement method for rotation speed and movements

The paper deal with a new measurement method for rotation speed and movements of shafts using non-contact eddy current sensors. The main advantages and shortcomings of this method are considered. The prospects of use of this method for various practical applications are analyzed. Special attention in the work is paid to errors of measurements that arise during the using of this technique and resistance of this method to impact of noise. Possible paths for improvement of characteristics of this method are presented. Now proposed method assumes determination of rotation speed with inaccuracy about 0.1 RPM and the space provision of a shaft with inaccuracy of 0.1 mm when using only one sensor.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2018 Ural Symposium on Biomedical Engineering, Radioelectronics and Information Technology (USBEREIT)

自引率

0.00%

发文量