Studying effect of static concentration for chemical machining on surface roughness and metal removal rate for low carbon steel

Chemical machining is one of non traditional machining methods. It is necessary to study the main foundations of the process and the parameters affecting this process. In this research worked to reach the higher surface smoothness and lowest metal removal when a low carbon steel alloy was machined. Been using this alloy of chemically machined using etchant solution (Ferric chloride FeCl 3 ) .Factors that have been studied: machining time and concentration of etchant where three concentrations were studied (20, 40 and 60%). Each sample was machined by different times (1, 3, 5, 7 and 9 min).Metal removal rate was calculated depending on weight loss due to chemical machining based on corrosion mechanism. Performed tests hardness, surface roughness and an atomic force microscope examination of the surfaces of the samples chemically machined before the process and after it.Results showed