D-Statcom线性反馈控制器在DPG故障中的应用

Proceedings of the 41st International Universities Power Engineering Conference Pub Date : 2006-09-01 DOI:10.1109/UPEC.2006.367627

S. Aizam, B. C. Kok, N. Mariun, H. Hizam, N. Wahab

{"title":"D-Statcom线性反馈控制器在DPG故障中的应用","authors":"S. Aizam, B. C. Kok, N. Mariun, H. Hizam, N. Wahab","doi":"10.1109/UPEC.2006.367627","DOIUrl":null,"url":null,"abstract":"This paper presents the application of linear feedback controller on distribution static synchronous compensator (D-STATCOM) for mitigating double phase to ground (DPG) fault at the distribution system. The pole placement technique is applied by shifting the existing poles to the new poles locations for fast response compare to the conventional controller. This type of inverter control is very useful in D-STATCOM application which controls the inverter to inject the unbalanced current or voltage or both for mitigating the fault condition that occurs at the distribution system. The controller will give respond to the lines that are affected by the fault and restore the system to its normal conditions. The simulation and design of the controller is done using MATLAB software with Power Blockset Toolbox and SIMULINK","PeriodicalId":184186,"journal":{"name":"Proceedings of the 41st International Universities Power Engineering Conference","volume":"51 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2006-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"14","resultStr":"{\"title\":\"Linear Feedback Controller for D-Statcom in DPG Fault Application\",\"authors\":\"S. Aizam, B. C. Kok, N. Mariun, H. Hizam, N. Wahab\",\"doi\":\"10.1109/UPEC.2006.367627\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents the application of linear feedback controller on distribution static synchronous compensator (D-STATCOM) for mitigating double phase to ground (DPG) fault at the distribution system. The pole placement technique is applied by shifting the existing poles to the new poles locations for fast response compare to the conventional controller. This type of inverter control is very useful in D-STATCOM application which controls the inverter to inject the unbalanced current or voltage or both for mitigating the fault condition that occurs at the distribution system. The controller will give respond to the lines that are affected by the fault and restore the system to its normal conditions. The simulation and design of the controller is done using MATLAB software with Power Blockset Toolbox and SIMULINK\",\"PeriodicalId\":184186,\"journal\":{\"name\":\"Proceedings of the 41st International Universities Power Engineering Conference\",\"volume\":\"51 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2006-09-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"14\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of the 41st International Universities Power Engineering Conference\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/UPEC.2006.367627\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the 41st International Universities Power Engineering Conference","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/UPEC.2006.367627","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 14

摘要

本文介绍了线性反馈控制器在配电静态同步补偿器(D-STATCOM)上的应用，以减轻配电系统双相接地(DPG)故障。极点放置技术通过将现有极点移动到新的极点位置来实现与传统控制器相比的快速响应。这种类型的逆变器控制在D-STATCOM应用中非常有用，它控制逆变器注入不平衡电流或电压，或两者兼有，以减轻配电系统发生的故障情况。控制器将对受故障影响的线路作出响应，使系统恢复到正常状态。采用MATLAB软件，结合Power Blockset Toolbox和SIMULINK对控制器进行仿真设计

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Linear Feedback Controller for D-Statcom in DPG Fault Application

This paper presents the application of linear feedback controller on distribution static synchronous compensator (D-STATCOM) for mitigating double phase to ground (DPG) fault at the distribution system. The pole placement technique is applied by shifting the existing poles to the new poles locations for fast response compare to the conventional controller. This type of inverter control is very useful in D-STATCOM application which controls the inverter to inject the unbalanced current or voltage or both for mitigating the fault condition that occurs at the distribution system. The controller will give respond to the lines that are affected by the fault and restore the system to its normal conditions. The simulation and design of the controller is done using MATLAB software with Power Blockset Toolbox and SIMULINK

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Proceedings of the 41st International Universities Power Engineering Conference

自引率

0.00%

发文量