基于RFID的在制品跟踪监控系统

2012 Third International Conference on Intelligent Control and Information Processing Pub Date : 2012-07-15 DOI:10.1109/ICICIP.2012.6391469

Changyong Yin, Qingzhong Gao, J. Tian

{"title":"基于RFID的在制品跟踪监控系统","authors":"Changyong Yin, Qingzhong Gao, J. Tian","doi":"10.1109/ICICIP.2012.6391469","DOIUrl":null,"url":null,"abstract":"In this paper, RFID is applied in work-in-process (WIP) tracking and monitoring. RFID readers that could capture WIP by identifying tags attached on it are equipped at every stations and buffer zones. The proposed WIP tracking and monitoring system based on RFID is a closed-loop system and composed of RFID subsystem, data processing subsystem, tracking and monitoring subsystem. Generalizing goals of the system, we built the network architecture and function model. And then RFID based WIP tracking method by which the current position of WIP and its finished procedure route could be got was discussed. Lastly, RFID based analysis model of WIP processing was also discussed. Lastly, risk and progress analysis model of finished procedures for WIP were built to evaluate the probability of risk occuring in produciton and the satisfactory degree of WIP progress.","PeriodicalId":376265,"journal":{"name":"2012 Third International Conference on Intelligent Control and Information Processing","volume":"249 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"WIP tracking and monitoring system based on RFID\",\"authors\":\"Changyong Yin, Qingzhong Gao, J. Tian\",\"doi\":\"10.1109/ICICIP.2012.6391469\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, RFID is applied in work-in-process (WIP) tracking and monitoring. RFID readers that could capture WIP by identifying tags attached on it are equipped at every stations and buffer zones. The proposed WIP tracking and monitoring system based on RFID is a closed-loop system and composed of RFID subsystem, data processing subsystem, tracking and monitoring subsystem. Generalizing goals of the system, we built the network architecture and function model. And then RFID based WIP tracking method by which the current position of WIP and its finished procedure route could be got was discussed. Lastly, RFID based analysis model of WIP processing was also discussed. Lastly, risk and progress analysis model of finished procedures for WIP were built to evaluate the probability of risk occuring in produciton and the satisfactory degree of WIP progress.\",\"PeriodicalId\":376265,\"journal\":{\"name\":\"2012 Third International Conference on Intelligent Control and Information Processing\",\"volume\":\"249 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-07-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2012 Third International Conference on Intelligent Control and Information Processing\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICICIP.2012.6391469\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 Third International Conference on Intelligent Control and Information Processing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICICIP.2012.6391469","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

本文将RFID技术应用于在制品跟踪与监控中。每个站点和缓冲区都配备了RFID读取器，可以通过识别附着在其上的标签来捕获在制品。本文提出的基于RFID的在制品跟踪监控系统是一个闭环系统，由RFID子系统、数据处理子系统、跟踪监控子系统组成。根据系统的总体目标，建立了网络体系结构和功能模型。然后讨论了基于RFID的在制品跟踪方法，该方法可以获取在制品的当前位置及其成品路线。最后，讨论了基于RFID的在制品加工分析模型。最后，建立了在制品成品过程的风险与进度分析模型，对生产过程中发生风险的概率和在制品成品过程的满意程度进行了评价。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

WIP tracking and monitoring system based on RFID

In this paper, RFID is applied in work-in-process (WIP) tracking and monitoring. RFID readers that could capture WIP by identifying tags attached on it are equipped at every stations and buffer zones. The proposed WIP tracking and monitoring system based on RFID is a closed-loop system and composed of RFID subsystem, data processing subsystem, tracking and monitoring subsystem. Generalizing goals of the system, we built the network architecture and function model. And then RFID based WIP tracking method by which the current position of WIP and its finished procedure route could be got was discussed. Lastly, RFID based analysis model of WIP processing was also discussed. Lastly, risk and progress analysis model of finished procedures for WIP were built to evaluate the probability of risk occuring in produciton and the satisfactory degree of WIP progress.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2012 Third International Conference on Intelligent Control and Information Processing

自引率

0.00%

发文量