TE/sub 011+/spl δ //模式蓝宝石谐振探头,用于精确表征高温超导薄膜的微波表面电阻

Jian Lu, X. Ren, Qishao Zhang
{"title":"TE/sub 011+/spl δ //模式蓝宝石谐振探头,用于精确表征高温超导薄膜的微波表面电阻","authors":"Jian Lu, X. Ren, Qishao Zhang","doi":"10.1109/ICCS.1994.474261","DOIUrl":null,"url":null,"abstract":"A special TE/sub 011+/spl delta// mode sapphire resonator and an equivalent perfect conductor calibration technique were developed to measure the surface resistance Rs of a single piece of HTS thin film non-destructively at 10 GHz and 77 K. The resonator is formed by a permanent probe and a replaceable test sample. The probe has Q-factor greater than 280000-good sample load repeatability and sensitivity about 20 /spl mu//spl Omega/ for HTS samples under test with dimension equal to or greater than /spl phi/28 mm. The calibration employs a symmetric configuration which presents an equivalent Rs of zero ohm and ensures the accuracy of the measurement. The measured Rs data of YBCO thin films made by laser ablation and magnetic sputtering are less than 250 /spl mu//spl Omega/.<<ETX>>","PeriodicalId":158681,"journal":{"name":"Proceedings of ICCS '94","volume":"57 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1994-11-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"A TE/sub 011+/spl delta// mode sapphire resonator probe for accurate characterization of microwave surface resistance of HTS thin films\",\"authors\":\"Jian Lu, X. Ren, Qishao Zhang\",\"doi\":\"10.1109/ICCS.1994.474261\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A special TE/sub 011+/spl delta// mode sapphire resonator and an equivalent perfect conductor calibration technique were developed to measure the surface resistance Rs of a single piece of HTS thin film non-destructively at 10 GHz and 77 K. The resonator is formed by a permanent probe and a replaceable test sample. The probe has Q-factor greater than 280000-good sample load repeatability and sensitivity about 20 /spl mu//spl Omega/ for HTS samples under test with dimension equal to or greater than /spl phi/28 mm. The calibration employs a symmetric configuration which presents an equivalent Rs of zero ohm and ensures the accuracy of the measurement. The measured Rs data of YBCO thin films made by laser ablation and magnetic sputtering are less than 250 /spl mu//spl Omega/.<<ETX>>\",\"PeriodicalId\":158681,\"journal\":{\"name\":\"Proceedings of ICCS '94\",\"volume\":\"57 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1994-11-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of ICCS '94\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICCS.1994.474261\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of ICCS '94","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICCS.1994.474261","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

摘要

研制了一种特殊的TE/sub 011+/spl δ //模式蓝宝石谐振器和等效完美导体校准技术,用于在10 GHz和77 K下对单片高温超导薄膜表面电阻Rs进行无损测量。谐振器由一个永久探头和一个可更换的测试样品组成。该探头的q系数大于280,000 -对于尺寸等于或大于/spl phi/ 28mm的HTS样品,具有良好的样品负载重复性和灵敏度,约为20 /spl mu//spl Omega/。校准采用对称配置,呈现零欧姆的等效Rs,并确保测量的准确性。激光烧蚀和磁溅射制备的YBCO薄膜的Rs值均小于250 /spl mu//spl Omega/.>
本文章由计算机程序翻译,如有差异,请以英文原文为准。
A TE/sub 011+/spl delta// mode sapphire resonator probe for accurate characterization of microwave surface resistance of HTS thin films
A special TE/sub 011+/spl delta// mode sapphire resonator and an equivalent perfect conductor calibration technique were developed to measure the surface resistance Rs of a single piece of HTS thin film non-destructively at 10 GHz and 77 K. The resonator is formed by a permanent probe and a replaceable test sample. The probe has Q-factor greater than 280000-good sample load repeatability and sensitivity about 20 /spl mu//spl Omega/ for HTS samples under test with dimension equal to or greater than /spl phi/28 mm. The calibration employs a symmetric configuration which presents an equivalent Rs of zero ohm and ensures the accuracy of the measurement. The measured Rs data of YBCO thin films made by laser ablation and magnetic sputtering are less than 250 /spl mu//spl Omega/.<>
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信