Wiwik Handayani, Hutama Muhammad Anhar, Lilik Murjana
{"title":"蜡染文字简历的质量控制。蜡染郁金香采用统计质量控制(sqc)方法","authors":"Wiwik Handayani, Hutama Muhammad Anhar, Lilik Murjana","doi":"10.26618/jeb.v17i2.6206","DOIUrl":null,"url":null,"abstract":"This study aims to analyze quality control at CV. Batik Tulis Al Huda. This type of research is quantitive descriptive research. In this research, the sample used was the number of the defect in the batik tulis product at CV. Batik Tulis Al Huda in 2019. This research uses the Statistical Quality Control method with tools namely check sheet, histogram, control chart, Pareto diagram, and cause-effect diagram. The results showed that the batik production process still experienced irregularities or was out of control. The overall level of damage reached 3.93% of the total production. Factors that cause defective products are human error, procedures that are not carried out properly, and equipment that is not in good condition. ","PeriodicalId":250522,"journal":{"name":"Jurnal Ekonomi Balance","volume":"127 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2021-12-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"QUALITY CONTROL OF WRITTEN BATIK CV. BATIK TULIS AL HUDA WITH STATISTICAL QUALITY CONTROL (SQC) METHOD\",\"authors\":\"Wiwik Handayani, Hutama Muhammad Anhar, Lilik Murjana\",\"doi\":\"10.26618/jeb.v17i2.6206\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study aims to analyze quality control at CV. Batik Tulis Al Huda. This type of research is quantitive descriptive research. In this research, the sample used was the number of the defect in the batik tulis product at CV. Batik Tulis Al Huda in 2019. This research uses the Statistical Quality Control method with tools namely check sheet, histogram, control chart, Pareto diagram, and cause-effect diagram. The results showed that the batik production process still experienced irregularities or was out of control. The overall level of damage reached 3.93% of the total production. Factors that cause defective products are human error, procedures that are not carried out properly, and equipment that is not in good condition. \",\"PeriodicalId\":250522,\"journal\":{\"name\":\"Jurnal Ekonomi Balance\",\"volume\":\"127 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-12-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Jurnal Ekonomi Balance\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.26618/jeb.v17i2.6206\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Jurnal Ekonomi Balance","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.26618/jeb.v17i2.6206","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
本研究旨在分析CV的质量控制。蜡染图利斯·胡达。这种类型的研究是定量描述性研究。在本研究中，使用的样本是蜡染郁金香产品在CV的缺陷数。2019年的Batik Tulis Al Huda。本研究采用统计质量控制方法，工具为检查表、直方图、控制图、帕累托图、因果图。结果表明，蜡染生产过程仍然存在不规范或失控的情况。总体损害程度达到了总产量的3.93%。造成缺陷产品的因素是人为错误，程序没有正确执行，设备状况不佳。
QUALITY CONTROL OF WRITTEN BATIK CV. BATIK TULIS AL HUDA WITH STATISTICAL QUALITY CONTROL (SQC) METHOD
This study aims to analyze quality control at CV. Batik Tulis Al Huda. This type of research is quantitive descriptive research. In this research, the sample used was the number of the defect in the batik tulis product at CV. Batik Tulis Al Huda in 2019. This research uses the Statistical Quality Control method with tools namely check sheet, histogram, control chart, Pareto diagram, and cause-effect diagram. The results showed that the batik production process still experienced irregularities or was out of control. The overall level of damage reached 3.93% of the total production. Factors that cause defective products are human error, procedures that are not carried out properly, and equipment that is not in good condition.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
