q示波器:一个基于pc的实时示波器

2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications Pub Date : 2008-07-12 DOI:10.1109/CITISIA.2008.4607341

Y. Tew, B. Goi

{"title":"q示波器:一个基于pc的实时示波器","authors":"Y. Tew, B. Goi","doi":"10.1109/CITISIA.2008.4607341","DOIUrl":null,"url":null,"abstract":"The scenery of this paper is to design a PC-based Real Time Oscilloscope, called dasiaQscilloscopepsila. Qscilloscope is capable to connect a computer with a small device via universal serial bus (USB) port for voltage signal waveform display and alteration. It detects maximum +20V to minimum -20V with the input frequency range from 0.1Hz - 1 kHz. Furthermore, it interfaces with host PC via the USB port from 9.6k to 115.2k baud rate. Qscilloscope Software Application is constructed by using Visual Basic .Net for user to interface the device with a well designed Graphic User Interface. It consists of several embedded features such as open, save and print waveform. By changing the scaling properties and graphic properties, users are allowed to modify the input signal to a desired output waveform.","PeriodicalId":194815,"journal":{"name":"2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications","volume":"113 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2008-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Qscilloscope: A PC-based Real Time Oscilloscope\",\"authors\":\"Y. Tew, B. Goi\",\"doi\":\"10.1109/CITISIA.2008.4607341\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The scenery of this paper is to design a PC-based Real Time Oscilloscope, called dasiaQscilloscopepsila. Qscilloscope is capable to connect a computer with a small device via universal serial bus (USB) port for voltage signal waveform display and alteration. It detects maximum +20V to minimum -20V with the input frequency range from 0.1Hz - 1 kHz. Furthermore, it interfaces with host PC via the USB port from 9.6k to 115.2k baud rate. Qscilloscope Software Application is constructed by using Visual Basic .Net for user to interface the device with a well designed Graphic User Interface. It consists of several embedded features such as open, save and print waveform. By changing the scaling properties and graphic properties, users are allowed to modify the input signal to a desired output waveform.\",\"PeriodicalId\":194815,\"journal\":{\"name\":\"2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications\",\"volume\":\"113 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2008-07-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CITISIA.2008.4607341\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CITISIA.2008.4607341","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 3

摘要

本文的场景是设计一个基于pc机的实时示波器，称为dasiasicilloepsila。q示波器能够通过USB接口将计算机与小型设备连接起来，进行电压信号波形的显示和修改。它检测最大+20V至最小-20V，输入频率范围为0.1Hz - 1khz。此外，它通过USB接口与主机PC机接口，波特率从9.6k到115.2k。q示波器软件应用程序是使用Visual basic.net构建的，用户可以通过精心设计的图形用户界面与设备进行交互。它包括几个嵌入式功能，如打开，保存和打印波形。通过改变缩放属性和图形属性，用户可以将输入信号修改为所需的输出波形。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Qscilloscope: A PC-based Real Time Oscilloscope

The scenery of this paper is to design a PC-based Real Time Oscilloscope, called dasiaQscilloscopepsila. Qscilloscope is capable to connect a computer with a small device via universal serial bus (USB) port for voltage signal waveform display and alteration. It detects maximum +20V to minimum -20V with the input frequency range from 0.1Hz - 1 kHz. Furthermore, it interfaces with host PC via the USB port from 9.6k to 115.2k baud rate. Qscilloscope Software Application is constructed by using Visual Basic .Net for user to interface the device with a well designed Graphic User Interface. It consists of several embedded features such as open, save and print waveform. By changing the scaling properties and graphic properties, users are allowed to modify the input signal to a desired output waveform.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications

自引率

0.00%

发文量