用于整流天线的印刷领结偶极子阵列天线的设计

S. Salsabila, A. D. Setiawan, Atik Charisma, A. Najmurrokhman, A. Munir
{"title":"用于整流天线的印刷领结偶极子阵列天线的设计","authors":"S. Salsabila, A. D. Setiawan, Atik Charisma, A. Najmurrokhman, A. Munir","doi":"10.1109/ICWT.2017.8284144","DOIUrl":null,"url":null,"abstract":"In this paper, the design of printed bowtie dipole array antenna for rectenna application of radio frequency (RF) energy harvesting is proposed. Rectenna has mainly two main components, i.e. receiver antenna and rectifier circuit. Here, the receiver antenna is intended to operate at the frequency of 1.8GHz in application of Groupe Spécial Mobile (GSM) 1800MHz signal response. Bowtie dipole array antenna is chosen as it has simple design and high gain. The antenna is simulated on an FR4 epoxy dielectric substrate with the thickness of 1.6mm. It has been investigated through parametric study to reach the required specification. From the result, it shows that the proposed antenna arranged in 4×1 bowtie dipole array antenna has accomplished the working frequency of 1.82GHz. In addition, some discussion of simulation result will mainly focused in achieving an optimum design of array antenna.","PeriodicalId":273103,"journal":{"name":"2017 3rd International Conference on Wireless and Telematics (ICWT)","volume":"51 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2017-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"8","resultStr":"{\"title\":\"Design of printed bowtie dipole array antenna for rectenna application\",\"authors\":\"S. Salsabila, A. D. Setiawan, Atik Charisma, A. Najmurrokhman, A. Munir\",\"doi\":\"10.1109/ICWT.2017.8284144\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, the design of printed bowtie dipole array antenna for rectenna application of radio frequency (RF) energy harvesting is proposed. Rectenna has mainly two main components, i.e. receiver antenna and rectifier circuit. Here, the receiver antenna is intended to operate at the frequency of 1.8GHz in application of Groupe Spécial Mobile (GSM) 1800MHz signal response. Bowtie dipole array antenna is chosen as it has simple design and high gain. The antenna is simulated on an FR4 epoxy dielectric substrate with the thickness of 1.6mm. It has been investigated through parametric study to reach the required specification. From the result, it shows that the proposed antenna arranged in 4×1 bowtie dipole array antenna has accomplished the working frequency of 1.82GHz. In addition, some discussion of simulation result will mainly focused in achieving an optimum design of array antenna.\",\"PeriodicalId\":273103,\"journal\":{\"name\":\"2017 3rd International Conference on Wireless and Telematics (ICWT)\",\"volume\":\"51 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-07-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"8\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2017 3rd International Conference on Wireless and Telematics (ICWT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICWT.2017.8284144\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2017 3rd International Conference on Wireless and Telematics (ICWT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICWT.2017.8284144","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 8

摘要

本文提出了一种用于射频能量采集整流天线的印刷领结偶极子阵列天线的设计。整流天线主要由接收天线和整流电路两部分组成。这里,接收机天线拟工作在1.8GHz频率,应用于GSM (Groupe sp移动通信系统)1800MHz信号响应。之所以选择鲍蒂偶极子阵列天线,是因为它设计简单,增益高。在厚度为1.6mm的FR4环氧介电基板上对天线进行了仿真。通过参数化研究,达到了要求的规格。结果表明,采用4×1领结偶极子阵列天线布置的天线实现了1.82GHz的工作频率。此外,对仿真结果的讨论主要集中在阵列天线的优化设计上。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Design of printed bowtie dipole array antenna for rectenna application
In this paper, the design of printed bowtie dipole array antenna for rectenna application of radio frequency (RF) energy harvesting is proposed. Rectenna has mainly two main components, i.e. receiver antenna and rectifier circuit. Here, the receiver antenna is intended to operate at the frequency of 1.8GHz in application of Groupe Spécial Mobile (GSM) 1800MHz signal response. Bowtie dipole array antenna is chosen as it has simple design and high gain. The antenna is simulated on an FR4 epoxy dielectric substrate with the thickness of 1.6mm. It has been investigated through parametric study to reach the required specification. From the result, it shows that the proposed antenna arranged in 4×1 bowtie dipole array antenna has accomplished the working frequency of 1.82GHz. In addition, some discussion of simulation result will mainly focused in achieving an optimum design of array antenna.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信