Realization of a Bionic Hand Controlled via Bluetooth Communication Utilizing a Microcontroller

The ability of people without limbs to do their own work and their adaptation to life can be achieved with bionic hands. The aim of this study is to realize the design and application of bionic hand that can be controlled by mobile application for handicapped individuals. The aerobic designs necessary to solve this problem were made and a prototype was produced and controlled with Arduino Mega 2560 microcontroller. For the five fingers of the bionic hand designed with the work carried out, the independent movement of the five fingers from the fingertip to all the other joints has been successfully performed using five SG90 model mini servomotors. The movement of the servomotors is provided by the software developed with the MIT AI2 Companion program on the mobile phone. The software algorithm has been fulfilled separately for each finger and each joint. Microcontroller and mobile phone communication is done with HC-06 Bluetooth module. Servomotor fin connections are made with fishing line with the tip of each finger. The two joints of the thumb and three joints of the other four fingers are controlled by winding the fishing line, which is connected to the servomotor, according to the determined rotation angle. Thus, the control of the fingers on the hand was realized through the mobile application. Ultimately, the effective use of the bionic hand will have an impact on every individual's participation in society. Every individual who is brought into the society has the potential to be an individual who enters the business life at the same time. For this reason, this will allow for an increase in employment and working power. It is also more sustainable because it raises people's living standards.