高强多孔混凝土的性能研究

H. Fujiwara, R. Tomita, T. Okamoto, A. Dozono, A. Obatake
{"title":"高强多孔混凝土的性能研究","authors":"H. Fujiwara, R. Tomita, T. Okamoto, A. Dozono, A. Obatake","doi":"10.14359/6038","DOIUrl":null,"url":null,"abstract":"A new method of producing high-strength porous concrete has recently been developed in Japan. In this method, porous concrete is produced by coating the coarse aggregates with a high-strength mortar, then applying vibration to fuse them. Porous concrete produced by this method has the following properties. It has a continuous void system with a volume-to-total-void ratio exceeding 85% and a compressive strength of 20 MPa or greater when water permeability is 2 cm/sec. The porous concrete produced exhibited good durability in freezing and thawing tests (ASTM C666, Procedure B) and, while the amount of drying shrinkage is about 60%, or smaller than that of conventional concrete, such shrinkage occurred very rapidly.","PeriodicalId":255305,"journal":{"name":"SP-179: Fourth CANMET/ACI/JCI Conference: Advances in Concrete Technology","volume":"5 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1998-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"15","resultStr":"{\"title\":\"Properties of High-Strength Porous Concrete\",\"authors\":\"H. Fujiwara, R. Tomita, T. Okamoto, A. Dozono, A. Obatake\",\"doi\":\"10.14359/6038\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A new method of producing high-strength porous concrete has recently been developed in Japan. In this method, porous concrete is produced by coating the coarse aggregates with a high-strength mortar, then applying vibration to fuse them. Porous concrete produced by this method has the following properties. It has a continuous void system with a volume-to-total-void ratio exceeding 85% and a compressive strength of 20 MPa or greater when water permeability is 2 cm/sec. The porous concrete produced exhibited good durability in freezing and thawing tests (ASTM C666, Procedure B) and, while the amount of drying shrinkage is about 60%, or smaller than that of conventional concrete, such shrinkage occurred very rapidly.\",\"PeriodicalId\":255305,\"journal\":{\"name\":\"SP-179: Fourth CANMET/ACI/JCI Conference: Advances in Concrete Technology\",\"volume\":\"5 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1998-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"15\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"SP-179: Fourth CANMET/ACI/JCI Conference: Advances in Concrete Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.14359/6038\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"SP-179: Fourth CANMET/ACI/JCI Conference: Advances in Concrete Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.14359/6038","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 15

摘要

日本最近开发了一种生产高强多孔混凝土的新方法。在这种方法中,多孔混凝土是通过在粗骨料表面涂上高强度砂浆,然后施加振动使其融合而成的。用这种方法生产的多孔混凝土具有以下性能:它具有连续的空隙体系,体积与总空隙比超过85%,当透水性为2 cm/sec时,抗压强度达到20 MPa以上。所制备的多孔混凝土在冻融试验(ASTM C666,程序B)中表现出良好的耐久性,虽然干燥收缩量约为60%,或小于常规混凝土,但这种收缩发生得非常快。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Properties of High-Strength Porous Concrete
A new method of producing high-strength porous concrete has recently been developed in Japan. In this method, porous concrete is produced by coating the coarse aggregates with a high-strength mortar, then applying vibration to fuse them. Porous concrete produced by this method has the following properties. It has a continuous void system with a volume-to-total-void ratio exceeding 85% and a compressive strength of 20 MPa or greater when water permeability is 2 cm/sec. The porous concrete produced exhibited good durability in freezing and thawing tests (ASTM C666, Procedure B) and, while the amount of drying shrinkage is about 60%, or smaller than that of conventional concrete, such shrinkage occurred very rapidly.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信