横向磁通直线电机的设计程序

Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation Pub Date : 2010-05-09 DOI:10.1109/CEFC.2010.5481779

Junghwan Chang, Jiwon Kim, Jiyoung Lee, D. Kang, Kwangwoon Kim

{"title":"横向磁通直线电机的设计程序","authors":"Junghwan Chang, Jiwon Kim, Jiyoung Lee, D. Kang, Kwangwoon Kim","doi":"10.1109/CEFC.2010.5481779","DOIUrl":null,"url":null,"abstract":"This paper presents analytical design procedures of transverse flux linear motor (TFLM). With ratios of important design variables and simplified equivalent magnetic circuit, flux linkage is determined at load and no-load condition. The number of turns of windings can be calculated by considering the amplitude of applied voltage, and rated current, coil diameter, and winding area can be obtained with the help of empirical formula for determining required magnetomotive force (MMF). The usefulness of proposed design method for TFLM is verified by three-dimensional finite element analysis and experimental results of prototyped machine.","PeriodicalId":148739,"journal":{"name":"Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation","volume":"72 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2010-05-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Design procedures of transverse flux linear motor\",\"authors\":\"Junghwan Chang, Jiwon Kim, Jiyoung Lee, D. Kang, Kwangwoon Kim\",\"doi\":\"10.1109/CEFC.2010.5481779\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents analytical design procedures of transverse flux linear motor (TFLM). With ratios of important design variables and simplified equivalent magnetic circuit, flux linkage is determined at load and no-load condition. The number of turns of windings can be calculated by considering the amplitude of applied voltage, and rated current, coil diameter, and winding area can be obtained with the help of empirical formula for determining required magnetomotive force (MMF). The usefulness of proposed design method for TFLM is verified by three-dimensional finite element analysis and experimental results of prototyped machine.\",\"PeriodicalId\":148739,\"journal\":{\"name\":\"Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation\",\"volume\":\"72 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-05-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CEFC.2010.5481779\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CEFC.2010.5481779","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

本文介绍了横向磁通直线电机(TFLM)的解析设计过程。利用重要设计变量的比值和简化的等效磁路，确定了有载和空载工况下的磁链。根据施加电压的幅值计算出绕组的匝数，根据确定所需磁动势的经验公式计算出额定电流、线圈直径和绕组面积。三维有限元分析和样机实验结果验证了所提设计方法的有效性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design procedures of transverse flux linear motor

This paper presents analytical design procedures of transverse flux linear motor (TFLM). With ratios of important design variables and simplified equivalent magnetic circuit, flux linkage is determined at load and no-load condition. The number of turns of windings can be calculated by considering the amplitude of applied voltage, and rated current, coil diameter, and winding area can be obtained with the help of empirical formula for determining required magnetomotive force (MMF). The usefulness of proposed design method for TFLM is verified by three-dimensional finite element analysis and experimental results of prototyped machine.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation

自引率

0.00%

发文量