提高圆极化贴片天线带宽的槽角截断方法

Nurul Fadilah
{"title":"提高圆极化贴片天线带宽的槽角截断方法","authors":"Nurul Fadilah","doi":"10.1109/ICWT.2017.8284133","DOIUrl":null,"url":null,"abstract":"This paper presents the bandwidth enhancement of patch antenna using diagonal slot and corner truncations. The antenna is intended to have circular polarization and operate at L-band frequency. Initially, a conventional patch antenna resonates at the L-band frequency of 1.27GHz is designed. Then, by adding a diagonal slot and corner truncations, the antenna parameter, i.e. −10dB working bandwidth, is analyzed. The antenna which is deployed on an FR4 epoxy dielectric substrate is fed using proximity coupling technique through a microstrip line beneath the patch. From the result, it shows that the impedance bandwidth of antenna is widened up to 60MHz or 200% with the axial ratio bandwidth of 200MHz in the frequency range from 1.16GHz to 1.36GHz.","PeriodicalId":273103,"journal":{"name":"2017 3rd International Conference on Wireless and Telematics (ICWT)","volume":"100 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2017-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"12","resultStr":"{\"title\":\"Slot and corner truncation for enhancing bandwidth of circularly polarized patch antenna\",\"authors\":\"Nurul Fadilah\",\"doi\":\"10.1109/ICWT.2017.8284133\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents the bandwidth enhancement of patch antenna using diagonal slot and corner truncations. The antenna is intended to have circular polarization and operate at L-band frequency. Initially, a conventional patch antenna resonates at the L-band frequency of 1.27GHz is designed. Then, by adding a diagonal slot and corner truncations, the antenna parameter, i.e. −10dB working bandwidth, is analyzed. The antenna which is deployed on an FR4 epoxy dielectric substrate is fed using proximity coupling technique through a microstrip line beneath the patch. From the result, it shows that the impedance bandwidth of antenna is widened up to 60MHz or 200% with the axial ratio bandwidth of 200MHz in the frequency range from 1.16GHz to 1.36GHz.\",\"PeriodicalId\":273103,\"journal\":{\"name\":\"2017 3rd International Conference on Wireless and Telematics (ICWT)\",\"volume\":\"100 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-07-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"12\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2017 3rd International Conference on Wireless and Telematics (ICWT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICWT.2017.8284133\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2017 3rd International Conference on Wireless and Telematics (ICWT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICWT.2017.8284133","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 12

摘要

本文提出了利用对角截断和角截断对贴片天线进行带宽增强的方法。该天线设计为圆极化,工作在l波段频率。首先,设计了一种传统的贴片天线,谐振频率为1.27GHz的l波段。然后,通过添加对角槽和角截断,分析天线参数,即−10dB工作带宽。部署在FR4环氧介质基板上的天线通过贴片下的微带线采用接近耦合技术馈电。结果表明,在1.16GHz ~ 1.36GHz的频率范围内,天线的阻抗带宽以200MHz的轴比带宽加宽至60MHz或200%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Slot and corner truncation for enhancing bandwidth of circularly polarized patch antenna
This paper presents the bandwidth enhancement of patch antenna using diagonal slot and corner truncations. The antenna is intended to have circular polarization and operate at L-band frequency. Initially, a conventional patch antenna resonates at the L-band frequency of 1.27GHz is designed. Then, by adding a diagonal slot and corner truncations, the antenna parameter, i.e. −10dB working bandwidth, is analyzed. The antenna which is deployed on an FR4 epoxy dielectric substrate is fed using proximity coupling technique through a microstrip line beneath the patch. From the result, it shows that the impedance bandwidth of antenna is widened up to 60MHz or 200% with the axial ratio bandwidth of 200MHz in the frequency range from 1.16GHz to 1.36GHz.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信