制备介质薄膜HDPE的表面处理对TSDC分析的影响

Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting Pub Date : 1993-10-02 DOI:10.1109/IAS.1993.299064

T. Oda, S. Wang

{"title":"制备介质薄膜HDPE的表面处理对TSDC分析的影响","authors":"T. Oda, S. Wang","doi":"10.1109/IAS.1993.299064","DOIUrl":null,"url":null,"abstract":"Press-formed films of high-density polyethylene (HDPE) were fabricated using a hand-made press sheet system. Thermally stimulated discharge current (TSDC) analysis of those films was carried out. In order to determine the relation between the TSDC and film manufacturing processes, parameters such as cooling rate and film surface roughness are investigated. The surface roughness is strongly dependent on forming plate materials which are in contact with the surface of the HDPE film during the press forming process. HDPE films which were in contact with Teflon sheets on both surfaces during the manufacturing process showed a large TSDC heterocurrent peak at 90 degrees C. In the case of a noncovering forming process, the HDPE films did not show any apparent TSDC peaks. Post-plasma surface processing of the HDPE films using low-pressure glow discharge was found to be very effective in connection with the TSDC of the films.<<ETX>>","PeriodicalId":345027,"journal":{"name":"Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting","volume":"15 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1993-10-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Surface handling effects of fabricating thin dielectric film HDPE on TSDC analysis\",\"authors\":\"T. Oda, S. Wang\",\"doi\":\"10.1109/IAS.1993.299064\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Press-formed films of high-density polyethylene (HDPE) were fabricated using a hand-made press sheet system. Thermally stimulated discharge current (TSDC) analysis of those films was carried out. In order to determine the relation between the TSDC and film manufacturing processes, parameters such as cooling rate and film surface roughness are investigated. The surface roughness is strongly dependent on forming plate materials which are in contact with the surface of the HDPE film during the press forming process. HDPE films which were in contact with Teflon sheets on both surfaces during the manufacturing process showed a large TSDC heterocurrent peak at 90 degrees C. In the case of a noncovering forming process, the HDPE films did not show any apparent TSDC peaks. Post-plasma surface processing of the HDPE films using low-pressure glow discharge was found to be very effective in connection with the TSDC of the films.<<ETX>>\",\"PeriodicalId\":345027,\"journal\":{\"name\":\"Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting\",\"volume\":\"15 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1993-10-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/IAS.1993.299064\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IAS.1993.299064","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

采用手工压片系统制备了高密度聚乙烯(HDPE)压片薄膜。对这些薄膜进行了热激放电电流(TSDC)分析。为了确定TSDC与成膜工艺之间的关系，研究了冷却速率和成膜表面粗糙度等参数。在压制成型过程中，与HDPE薄膜表面接触的成型板材料对表面粗糙度的影响很大。在制造过程中，与Teflon片材接触的HDPE薄膜在90°c处显示出较大的TSDC异电流峰。在非覆盖成型过程中，HDPE薄膜没有显示出任何明显的TSDC峰。利用低压辉光放电对HDPE薄膜进行等离子体后表面处理，对薄膜的TSDC有很好的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Surface handling effects of fabricating thin dielectric film HDPE on TSDC analysis

Press-formed films of high-density polyethylene (HDPE) were fabricated using a hand-made press sheet system. Thermally stimulated discharge current (TSDC) analysis of those films was carried out. In order to determine the relation between the TSDC and film manufacturing processes, parameters such as cooling rate and film surface roughness are investigated. The surface roughness is strongly dependent on forming plate materials which are in contact with the surface of the HDPE film during the press forming process. HDPE films which were in contact with Teflon sheets on both surfaces during the manufacturing process showed a large TSDC heterocurrent peak at 90 degrees C. In the case of a noncovering forming process, the HDPE films did not show any apparent TSDC peaks. Post-plasma surface processing of the HDPE films using low-pressure glow discharge was found to be very effective in connection with the TSDC of the films.<>

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting

自引率

0.00%

发文量