基于Simulink的CCM Boost PFC的研究

Proceedings of The 7th International Power Electronics and Motion Control Conference Pub Date : 2012-06-02 DOI:10.1109/IPEMC.2012.6259102

Xiangjun Zhang, Binze Wang, Hao Ding, Dianguo Xu

{"title":"基于Simulink的CCM Boost PFC的研究","authors":"Xiangjun Zhang, Binze Wang, Hao Ding, Dianguo Xu","doi":"10.1109/IPEMC.2012.6259102","DOIUrl":null,"url":null,"abstract":"Power factor correction (PFC) technology has gradually become an important subject in the field of power electronic research. CCM mode Boost PFC is the most commonly used topology in high power converting occasions. This paper presented a detailed analysis on working principle of CCM Boost PFC. Besides, according to the different states of inductor current and output current, the working mode of inductor energy supply can be devided into two types. In this paper the two working modes were analyzed, with the derivation of boundary conditions and the value of critical inductance. A 400W Boost PFC model was made on the basis of Simulink platform. The simulation waveforms and experimental results were presented at last.","PeriodicalId":236136,"journal":{"name":"Proceedings of The 7th International Power Electronics and Motion Control Conference","volume":"71 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-06-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":"{\"title\":\"Study of CCM Boost PFC based on Simulink\",\"authors\":\"Xiangjun Zhang, Binze Wang, Hao Ding, Dianguo Xu\",\"doi\":\"10.1109/IPEMC.2012.6259102\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Power factor correction (PFC) technology has gradually become an important subject in the field of power electronic research. CCM mode Boost PFC is the most commonly used topology in high power converting occasions. This paper presented a detailed analysis on working principle of CCM Boost PFC. Besides, according to the different states of inductor current and output current, the working mode of inductor energy supply can be devided into two types. In this paper the two working modes were analyzed, with the derivation of boundary conditions and the value of critical inductance. A 400W Boost PFC model was made on the basis of Simulink platform. The simulation waveforms and experimental results were presented at last.\",\"PeriodicalId\":236136,\"journal\":{\"name\":\"Proceedings of The 7th International Power Electronics and Motion Control Conference\",\"volume\":\"71 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-06-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"4\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of The 7th International Power Electronics and Motion Control Conference\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/IPEMC.2012.6259102\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of The 7th International Power Electronics and Motion Control Conference","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IPEMC.2012.6259102","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 4

摘要

功率因数校正(PFC)技术已逐渐成为电力电子领域的一个重要研究课题。CCM模式Boost PFC是高功率转换场合中最常用的拓扑结构。本文详细分析了CCM Boost pfc的工作原理，并根据电感电流和输出电流的不同状态，将电感供电的工作方式分为两种。本文分析了这两种工作模式，推导了边界条件和临界电感值。在Simulink平台上建立了400W Boost PFC模型。最后给出了仿真波形和实验结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Study of CCM Boost PFC based on Simulink

Power factor correction (PFC) technology has gradually become an important subject in the field of power electronic research. CCM mode Boost PFC is the most commonly used topology in high power converting occasions. This paper presented a detailed analysis on working principle of CCM Boost PFC. Besides, according to the different states of inductor current and output current, the working mode of inductor energy supply can be devided into two types. In this paper the two working modes were analyzed, with the derivation of boundary conditions and the value of critical inductance. A 400W Boost PFC model was made on the basis of Simulink platform. The simulation waveforms and experimental results were presented at last.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Proceedings of The 7th International Power Electronics and Motion Control Conference

自引率

0.00%

发文量