采用有限元法对钎焊过程中感应加热线圈进行建模、设计和分析

2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA) Pub Date : 2016-05-09 DOI:10.1109/AIC-MITCSA.2016.7759918

Mohammad Hameed Khazaal, Isam M. Abdulbaqi, R. Thejel

{"title":"采用有限元法对钎焊过程中感应加热线圈进行建模、设计和分析","authors":"Mohammad Hameed Khazaal, Isam M. Abdulbaqi, R. Thejel","doi":"10.1109/AIC-MITCSA.2016.7759918","DOIUrl":null,"url":null,"abstract":"In this research a modeling, design and analysis of the most suitable dimensions and the number of turns of the induction coil required for a certain brazing process was done by using FEM. Ansoft Maxwell computer package is used for this purpose. The simulation determines the electromagnetic field distribution inside the work coil by the required excitation current and frequency. Then the optimal work coil is determined. Also, it is used to determine the required magnitude of the load resonant circuit capacitance to achieve this frequency. The simulation describes the expected behavior of the load parameters during the brazing process.","PeriodicalId":315179,"journal":{"name":"2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA)","volume":"55 10","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-05-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"10","resultStr":"{\"title\":\"Modeling, design and analysis of an induction heating coil for brazing process using FEM\",\"authors\":\"Mohammad Hameed Khazaal, Isam M. Abdulbaqi, R. Thejel\",\"doi\":\"10.1109/AIC-MITCSA.2016.7759918\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this research a modeling, design and analysis of the most suitable dimensions and the number of turns of the induction coil required for a certain brazing process was done by using FEM. Ansoft Maxwell computer package is used for this purpose. The simulation determines the electromagnetic field distribution inside the work coil by the required excitation current and frequency. Then the optimal work coil is determined. Also, it is used to determine the required magnitude of the load resonant circuit capacitance to achieve this frequency. The simulation describes the expected behavior of the load parameters during the brazing process.\",\"PeriodicalId\":315179,\"journal\":{\"name\":\"2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA)\",\"volume\":\"55 10\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-05-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"10\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/AIC-MITCSA.2016.7759918\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/AIC-MITCSA.2016.7759918","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 10

摘要

本文采用有限元法对某钎焊工艺中感应线圈的最适宜尺寸和匝数进行了建模、设计和分析。Ansoft Maxwell计算机包用于此目的。仿真通过所需的励磁电流和励磁频率确定工作线圈内的电磁场分布。然后确定最佳工作线圈。此外，它还用于确定达到该频率所需的负载谐振电路电容的大小。模拟描述了钎焊过程中载荷参数的预期行为。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Modeling, design and analysis of an induction heating coil for brazing process using FEM

In this research a modeling, design and analysis of the most suitable dimensions and the number of turns of the induction coil required for a certain brazing process was done by using FEM. Ansoft Maxwell computer package is used for this purpose. The simulation determines the electromagnetic field distribution inside the work coil by the required excitation current and frequency. Then the optimal work coil is determined. Also, it is used to determine the required magnitude of the load resonant circuit capacitance to achieve this frequency. The simulation describes the expected behavior of the load parameters during the brazing process.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA)

自引率

0.00%

发文量