Superplastic Bonding of Electrodeposited Nanocrystalline Ni Alloys

Abstract

Superplastic bonding was performed using electrodeposited Ni and electrodeposited Ni – B to apply to low – temperature di ff usion bonding of carbon steel. Electrodeposited Ni and Ni – B were bonded at 450 ℃ in air and at a strain rate of 1 × 10 − 4 s − 1 . The shear test measured the bond strength, and the maximum bond strength of 69MPa was obtained. Since the obtained bonding strength at 450 ℃ is comparable to that obtained by di ff usion bonding of carbon steel at 0.5 T m , it is possible to decrease the bonding temperature to 0.4 T m by applying this boning process. The bonding strength depended on the amount of strain and increased as the strain increased in the range of strain 0.2 to 0.4. The voids at the interface shrink by superplastic deformation with grain boundary sliding, and the bonded area increases. In the superplastic bonding of electrodeposited Ni alloys, superplastic deformation e ff ectively shrinks voids with a radius of 1 – 2µm. ［ doi:10.2320 / jinstmet.J2022007 ］