VF/sub 2//VF/sub 3/ copolymer hydrophone for ultrasonic power measurements

Abstract

Hydrophones to be used in the characterization of medical ultrasonic transducers have been fabricated using a new polyvinylidene fluoride-trifluoroethylene (VF/sub 2/-VF/sub 3/) copolymer. The copolymer has an advantage over VF/sub 2/ in that it does not require prestretching before poling. Thin copolymer films can be cast from solution and then poled using the corona discharge method. As there is a need for small-diameter hydrophones to provide good spatial resolution in measuring highly focused ultrasonic beams, hydrophones with diameter as small as 0.1 mm have been made. Both needle-type and line hydrophones have been tested and their performance reported. In the case of line hydrophones, the output signal is proportional to the line integral of the acoustic pressure, and a computer-tomographic technique was used to reconstruct the beam profiles.<>