MCrAlX (X = Y, Hf and Si) Bond Coats by Cold Spray for High Temperature Applications

Abstract

MCrAlX powder compositions (M= Ni; Co and X= Y; Hf; Si or combination) are often thermally sprayed (TS) via vacuum plasma spray (VPS); low pressure plasma spray (LPPS) or high velocity oxy-fuel (HVOF) to produce high temperature oxidation and hot corrosion resistant bond coats (BC) for thermal barrier coatings (TBCs). Cold spray (CS) technology is currently considered as a promising alternative to the traditional TS solutions having the advantage of delivering oxide-free and very dense metallic coatings at relatively lower costs compared to VPS and LPPS. Here; we first present high-pressure CS deposition of NiCoCrAlY and NiCoCrAlYHfSi and discuss the influence of feedstock properties on the deposited BCs. CFD numerical simulation is employed to tailor the spray conditions based on the feedstock characteristics. Secondly; we present the laser assisted cold spray (LACS) deposition of NiCoCrAlYHfSi BCs using a low-pressure CS system. We show that LACS can be successfully used to deposit this particular powder while eliminating nozzle erosion and low deposition efficiency disadvantages observed during conventional CS. Lastly; high temperature isothermal oxidation of a TBC architecture having LACS BC is presented.