Tribological Properties of Cold Gas Spraying FeMnCrSi Alloy

热喷涂技术 Pub Date : 2021-06-15 DOI:10.31399/ASM.CP.ITSC2021P0616

R. Váz, S. Dosta, I. G. Cano, A. Pukasiewicz

引用次数: 0

Abstract

FeMnCrSi and 316L alloy coatings were deposited on carbon steel substrates via high-pressure cold gas spraying and their microstructure, hardness, and wear resistance were obtained. Ball-on-disk testing (ASTM G99) was used to measure sliding wear behaviors. The mechanism of wear was found to be the same for both coatings, although FeMnCrSi had a higher coefficient of friction while 316L had less volume loss.

查看原文本刊更多论文

低温气体喷涂FeMnCrSi合金的摩擦学性能

采用高压冷喷涂技术在碳钢基体上沉积FeMnCrSi和316L合金涂层，获得了其显微组织、硬度和耐磨性。球盘试验(ASTM G99)用于测量滑动磨损行为。两种涂层的磨损机制是相同的，尽管FeMnCrSi具有更高的摩擦系数，而316L具有较小的体积损失。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊