Study on the separation of silicon from refining slag of industrial silicon

IF 0.9 4区 材料科学 Q3 METALLURGY & METALLURGICAL ENGINEERING
Yong Hou, Guo-hua Zhang, K. Chou
{"title":"Study on the separation of silicon from refining slag of industrial silicon","authors":"Yong Hou, Guo-hua Zhang, K. Chou","doi":"10.1051/metal/2021036","DOIUrl":null,"url":null,"abstract":"During the process of production and refining of industrial silicon, the discharged slag usually contains more than 15 mass% of metallic silicon. However, the separation of silicon from slag is very difficult due to the close density of silicon and slag as well as the high viscosity of slag, which results in the waste of resources. In the present work, the effect of Na2O addition on the separation of silicon from slag is investigated in detail. It is found that the optimum separation condition of slag and silicon is 1723 K reacting for 60 min by adding 10 mass% Na2O to the slag. Viscosity and density are two important factors affecting the separation effect of silicon from slag. The addition of Na2O reduces the viscosity of slag and promotes the separation of silicon from slag. Even if the addition of Na2O will decrease the density of slag which is detrimental to the separation of silicon, the density variation is not the determining factor affecting the separation relative to viscosity. The separation and extraction of metallic silicon from silicon slag is of great significance for improving utilization of resources and reducing environmental pollution.","PeriodicalId":18527,"journal":{"name":"Metallurgical Research & Technology","volume":"15 1","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metallurgical Research & Technology","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1051/metal/2021036","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

During the process of production and refining of industrial silicon, the discharged slag usually contains more than 15 mass% of metallic silicon. However, the separation of silicon from slag is very difficult due to the close density of silicon and slag as well as the high viscosity of slag, which results in the waste of resources. In the present work, the effect of Na2O addition on the separation of silicon from slag is investigated in detail. It is found that the optimum separation condition of slag and silicon is 1723 K reacting for 60 min by adding 10 mass% Na2O to the slag. Viscosity and density are two important factors affecting the separation effect of silicon from slag. The addition of Na2O reduces the viscosity of slag and promotes the separation of silicon from slag. Even if the addition of Na2O will decrease the density of slag which is detrimental to the separation of silicon, the density variation is not the determining factor affecting the separation relative to viscosity. The separation and extraction of metallic silicon from silicon slag is of great significance for improving utilization of resources and reducing environmental pollution.
工业硅精炼渣中硅的分离研究
在工业硅的生产和精炼过程中,排放的炉渣中金属硅的质量分数通常在15%以上。但由于硅与渣的密度较密,渣的粘度较高,硅与渣的分离非常困难,造成了资源的浪费。本文详细研究了Na2O的加入对硅渣分离的影响。结果表明,炉渣与硅的最佳分离条件为1723 K,在炉渣中加入10质量%的Na2O,反应60 min。粘度和密度是影响硅渣分离效果的两个重要因素。Na2O的加入降低了炉渣的粘度,促进了硅与炉渣的分离。即使Na2O的加入会降低炉渣的密度,不利于硅的分离,但相对于粘度,密度的变化不是影响分离的决定因素。从硅渣中分离提取金属硅对提高资源利用率和减少环境污染具有重要意义。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Metallurgical Research & Technology
Metallurgical Research & Technology METALLURGY & METALLURGICAL ENGINEERING-
CiteScore
1.70
自引率
9.10%
发文量
65
审稿时长
4.4 months
期刊介绍: Metallurgical Research and Technology (MRT) is a peer-reviewed bi-monthly journal publishing original high-quality research papers in areas ranging from process metallurgy to metal product properties and applications of ferrous and non-ferrous metals and alloys, including light-metals. It covers also the materials involved in the metal processing as ores, refractories and slags. The journal is listed in the citation index Web of Science and has an Impact Factor. It is highly concerned by the technological innovation as a support of the metallurgical industry at a time when it has to tackle severe challenges like energy, raw materials, sustainability, environment... Strengthening and enhancing the dialogue between science and industry is at the heart of the scope of MRT. This is why it welcomes manuscripts focusing on industrial practice, as well as basic metallurgical knowledge or review articles.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信