Some problem questions in studying the properties of dynamically vulcanized polymer systems based on ethylene/1-hexene copolymer and nitrile butadiene rubber

IF 1.1 4区 材料科学 Q4 MATERIALS SCIENCE, COMPOSITES
N. Kakhramanov, Z. Huseynova, Yunis Gahramanli, Reykhan Hajiyeva, N. Arzumanova, R. Kurbanova, E. Suleymanova
{"title":"Some problem questions in studying the properties of dynamically vulcanized polymer systems based on ethylene/1-hexene copolymer and nitrile butadiene rubber","authors":"N. Kakhramanov, Z. Huseynova, Yunis Gahramanli, Reykhan Hajiyeva, N. Arzumanova, R. Kurbanova, E. Suleymanova","doi":"10.1177/14777606231189522","DOIUrl":null,"url":null,"abstract":"The article presents the results of a study of the influence of the type and concentration of nitrile butadiene rubber on the main physical and mechanical properties of polymer compositions based on compatibilized ethylene/1-hexene copolymer (EHC*). SKN-18, SKN-26, and SKN-40 were used as nitrile butadiene rubber. The compatibilizer – polyethylene-graft-methacrylic acid was used to improve the compatibility of the mixed components of the mixture. At the first stage, the task of the study was to investigate the effect of the concentration of the considered nitrile rubbers on such properties of the compositions as yield strength, tensile strength, elongation at break, flexural strength, melt flow rate and heat resistance. It was found that, regardless of the type of used nitrile butadiene rubber, with an increase in its content in the composition of the ethylene/1-hexene copolymer, a regular decrease in strength parameters, heat resistance, and melt fluidity is observed. It is shown that with the loading of 30 wt% SKN-18 or 40 wt% SKN-26 and SKN-40 into the composition of the ethylene/1-hexene copolymer phase inversion occurs in the composite materials, according to which the dispersed phase becomes a dispersed medium. The thermomechanical properties of the considered samples were studied. It was found that in those samples in which phase inversion occurred, a region of a highly elastic plateau is formed, which increases with an increase in the content of the rubber component. This area indicates the formation of elastomer with rubber properties. The regularities of crystallization of the compositions depending on the content of the amorphous component were studied by the method of stepwise dilatometry. The mechanism of crystal formation was studied depending on the content of the amorphous component. The influence of the crosslinking agent concentration – dicumyl peroxide on the main properties of dynamically vulcanized elastomers has been studied.","PeriodicalId":20860,"journal":{"name":"Progress in Rubber Plastics and Recycling Technology","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Progress in Rubber Plastics and Recycling Technology","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1177/14777606231189522","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, COMPOSITES","Score":null,"Total":0}
引用次数: 0

Abstract

The article presents the results of a study of the influence of the type and concentration of nitrile butadiene rubber on the main physical and mechanical properties of polymer compositions based on compatibilized ethylene/1-hexene copolymer (EHC*). SKN-18, SKN-26, and SKN-40 were used as nitrile butadiene rubber. The compatibilizer – polyethylene-graft-methacrylic acid was used to improve the compatibility of the mixed components of the mixture. At the first stage, the task of the study was to investigate the effect of the concentration of the considered nitrile rubbers on such properties of the compositions as yield strength, tensile strength, elongation at break, flexural strength, melt flow rate and heat resistance. It was found that, regardless of the type of used nitrile butadiene rubber, with an increase in its content in the composition of the ethylene/1-hexene copolymer, a regular decrease in strength parameters, heat resistance, and melt fluidity is observed. It is shown that with the loading of 30 wt% SKN-18 or 40 wt% SKN-26 and SKN-40 into the composition of the ethylene/1-hexene copolymer phase inversion occurs in the composite materials, according to which the dispersed phase becomes a dispersed medium. The thermomechanical properties of the considered samples were studied. It was found that in those samples in which phase inversion occurred, a region of a highly elastic plateau is formed, which increases with an increase in the content of the rubber component. This area indicates the formation of elastomer with rubber properties. The regularities of crystallization of the compositions depending on the content of the amorphous component were studied by the method of stepwise dilatometry. The mechanism of crystal formation was studied depending on the content of the amorphous component. The influence of the crosslinking agent concentration – dicumyl peroxide on the main properties of dynamically vulcanized elastomers has been studied.
乙烯/1-己烯共聚物与丁腈橡胶动态硫化聚合物体系性能研究中的若干问题
本文介绍了丁腈橡胶的种类和浓度对增容乙烯/1-己烯共聚物(EHC*)聚合物组合物主要物理力学性能影响的研究结果。SKN-18、SKN-26、SKN-40作为丁腈橡胶。采用增容剂—聚乙烯接枝甲基丙烯酸来改善混料组分的相容性。在第一阶段,研究的任务是研究所考虑的丁腈橡胶的浓度对组合物的屈服强度、拉伸强度、断裂伸长率、弯曲强度、熔体流动速率和耐热性等性能的影响。结果表明,无论使用何种类型的丁腈橡胶,随着其在乙烯/1-己烯共聚物组成中含量的增加,强度参数、耐热性和熔体流动性都有规律地降低。结果表明,在乙烯/1-己烯共聚物的组成中加入30 wt% SKN-18或40 wt% SKN-26和SKN-40后,复合材料中发生相转变,分散相成为分散介质。研究了所考虑样品的热力学性能。研究发现,在发生相变的样品中,形成了一个高弹性平台区域,该区域随着橡胶组分含量的增加而增大。这一区域表明形成了具有橡胶性能的弹性体。用逐步膨胀法研究了非晶态组分含量对组成物结晶的影响规律。研究了非晶组分含量对晶体形成机理的影响。研究了交联剂过氧化二氨基对动态硫化弹性体主要性能的影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Progress in Rubber Plastics and Recycling Technology
Progress in Rubber Plastics and Recycling Technology MATERIALS SCIENCE, COMPOSITES-POLYMER SCIENCE
CiteScore
4.40
自引率
7.70%
发文量
18
审稿时长
>12 weeks
期刊介绍: The journal aims to bridge the gap between research and development and the practical and commercial applications of polymers in a wide range of uses. Current developments and likely future trends are reviewed across key areas of the polymer industry, together with existing and potential opportunities for the innovative use of plastic and rubber products.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信