Investigation of low-temperature lipase production and enzymatic properties of Aspergillus Niger

IF 1 4区 工程技术 Q4 CHEMISTRY, MULTIDISCIPLINARY
Xianyao Ma, Zhang Kexin, W. Yong-gang, A. Ebadi, Mohsen Toughani
{"title":"Investigation of low-temperature lipase production and enzymatic properties of Aspergillus Niger","authors":"Xianyao Ma, Zhang Kexin, W. Yong-gang, A. Ebadi, Mohsen Toughani","doi":"10.30492/IJCCE.2021.529010.4694","DOIUrl":null,"url":null,"abstract":"To obtain the optimum fermentation medium and circumstances for extracellular lipase construction (as an important biocatalyst and promising industrial enzyme) by Aspergillus Niger, the fermentation conditions of Aspergillus Niger were optimized by single factor and response surface design, the enzymatic properties of the crude enzyme were studied. The results displayed that the optimum fermentation medium was soluble starch 4%, (NH4)2SO4 0.1%, K2HPO4 0.1%, MgSO4·7H2O 0.05%, peptone 3%, olive oil 1.05% and initial pH 7. The optimal fermentation conditions were 30℃, the sample size was 26 mL/250 mL and the shaking speed was 213 r/min. The optimized lipase activity was 1.55 U/mL, which was 7.75 times of the pre-optimized lipase. It was found that when the pH value of lipase was 7.0, the activity of lipase reached its maximum value of 79.3±6.82%. When pH value was between 6.0 and 8.0, the activity of lipase could be kept above 60% and the stability was good. At the same time, through temperature stability of lipase, found that the lipase was stable at 25℃- 35℃, its activity could reach more than 70%. When activity of enzyme reaches to maximum 107.6±9.57%, the temperature was 30℃.","PeriodicalId":14572,"journal":{"name":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","volume":"48 1","pages":""},"PeriodicalIF":1.0000,"publicationDate":"2021-07-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"25","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Iranian Journal of Chemistry & Chemical Engineering-international English Edition","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.30492/IJCCE.2021.529010.4694","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 25

Abstract

To obtain the optimum fermentation medium and circumstances for extracellular lipase construction (as an important biocatalyst and promising industrial enzyme) by Aspergillus Niger, the fermentation conditions of Aspergillus Niger were optimized by single factor and response surface design, the enzymatic properties of the crude enzyme were studied. The results displayed that the optimum fermentation medium was soluble starch 4%, (NH4)2SO4 0.1%, K2HPO4 0.1%, MgSO4·7H2O 0.05%, peptone 3%, olive oil 1.05% and initial pH 7. The optimal fermentation conditions were 30℃, the sample size was 26 mL/250 mL and the shaking speed was 213 r/min. The optimized lipase activity was 1.55 U/mL, which was 7.75 times of the pre-optimized lipase. It was found that when the pH value of lipase was 7.0, the activity of lipase reached its maximum value of 79.3±6.82%. When pH value was between 6.0 and 8.0, the activity of lipase could be kept above 60% and the stability was good. At the same time, through temperature stability of lipase, found that the lipase was stable at 25℃- 35℃, its activity could reach more than 70%. When activity of enzyme reaches to maximum 107.6±9.57%, the temperature was 30℃.
黑曲霉低温脂肪酶生产及酶学特性研究
为确定黑曲霉构建胞外脂肪酶(一种重要的生物催化剂和有发展前景的工业酶)的最佳发酵培养基和发酵条件,采用单因素法和响应面设计对黑曲霉的发酵条件进行了优化,并对粗酶的酶学性质进行了研究。结果表明,最佳发酵培养基为可溶性淀粉4%,(NH4)2SO4 0.1%, K2HPO4 0.1%, MgSO4·7H2O 0.05%,蛋白胨3%,橄榄油1.05%,初始pH为7。最佳发酵条件为30℃,进样量为26 mL/250 mL,振荡速度为213 r/min。优化后的脂肪酶活性为1.55 U/mL,是优化前脂肪酶的7.75倍。结果表明,当脂肪酶的pH值为7.0时,脂肪酶的活性达到最大值(79.3±6.82%)。当pH值在6.0 ~ 8.0之间时,脂肪酶活性可保持在60%以上,且稳定性较好。同时,通过对脂肪酶的温度稳定性研究,发现该脂肪酶在25℃- 35℃稳定,其活性可达70%以上。当温度为30℃时,酶活性达到最高(107.6±9.57%)。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
2.80
自引率
22.20%
发文量
0
审稿时长
6-12 weeks
期刊介绍: The aim of the Iranian Journal of Chemistry and Chemical Engineering is to foster the growth of educational, scientific and Industrial Research activities among chemists and chemical engineers and to provide a medium for mutual communication and relations between Iranian academia and the industry on the one hand, and the world the scientific community on the other.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信