Dry Sliding Wear Behaviour of Al6061 - Reinforcement with Graphite and Palm Stalk Ash

Q3 Engineering

International Journal of Vehicle Structures and Systems Pub Date : 2023-04-03 DOI:10.4273/ijvss.15.1.13

T. Nithyanandhan, N. Mohanraj, P. Sureshkumar, S. Sanjeev

引用次数: 0

Abstract

In this research an attempt is made to improve and to examine the wear behaviour of AL6061 composite with two different fillers such as graphite by adding the reinforcement particles of palm stalk ashes. AL6061 composite is developed on a metal matrix composite with the weight percentage of graphite (0.7 %) which is kept constant for all specimens and the reinforcement of palm stalk ash is varied as a percentage of weight (0.7%, 1.4%, 2.1%, 2.8% and 3.5%). Reinforced composites were preheated in the electrical furnace at 150°C for about an hour to remove the moisture. The reinforcement was added into molten aluminium into the stir casting furnace. The wear behaviour and corrosion rate of fabricated AL6061 metal composite reinforced with different dissipate materials were studied.

查看原文本刊更多论文

Al6061的干滑动磨损性能——石墨和棕榈秸秆灰增强

在本研究中，试图通过添加棕榈秸秆灰增强颗粒来改善AL6061复合材料的磨损性能，并研究了两种不同填料(如石墨)的磨损性能。AL6061复合材料是在金属基复合材料的基础上开发的，所有样品的石墨重量百分比(0.7%)保持不变，棕榈秸秆灰的增强率随重量百分比(0.7%，1.4%，2.1%，2.8%和3.5%)而变化。增强复合材料在150°C的电炉中预热约1小时以去除水分。在搅拌铸钢炉的铝液中加入增强剂。研究了不同耗散材料增强AL6061金属复合材料的磨损性能和腐蚀速率。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Vehicle Structures and Systems Engineering-Mechanical Engineering

CiteScore

0.90

自引率

0.00%

发文量

期刊介绍： The International Journal of Vehicle Structures and Systems (IJVSS) is a quarterly journal and is published by MechAero Foundation for Technical Research and Education Excellence (MAFTREE), based in Chennai, India. MAFTREE is engaged in promoting the advancement of technical research and education in the field of mechanical, aerospace, automotive and its related branches of engineering, science, and technology. IJVSS disseminates high quality original research and review papers, case studies, technical notes and book reviews. All published papers in this journal will have undergone rigorous peer review. IJVSS was founded in 2009. IJVSS is available in Print (ISSN 0975-3060) and Online (ISSN 0975-3540) versions. The prime focus of the IJVSS is given to the subjects of modelling, analysis, design, simulation, optimization and testing of structures and systems of the following: 1. Automotive vehicle including scooter, auto, car, motor sport and racing vehicles, 2. Truck, trailer and heavy vehicles for road transport, 3. Rail, bus, tram, emerging transit and hybrid vehicle, 4. Terrain vehicle, armoured vehicle, construction vehicle and Unmanned Ground Vehicle, 5. Aircraft, launch vehicle, missile, airship, spacecraft, space exploration vehicle, 6. Unmanned Aerial Vehicle, Micro Aerial Vehicle, 7. Marine vehicle, ship and yachts and under water vehicles.