Integrated Coupled Modelling Study to Assess CO2 Sequestration Potential in a Depleted Gas Field

Abstract

A depleted gas field is selected as CO2 storage site for future high CO2 content gas field development in Malaysia. The reservoir selected is a carbonate buildup of middle to late Miocene age. This paper describes an integrated modeling approach to evaluate CO2 sequestration potential in depleted carbonate gas reservoir. Integrated dynamic-geochemical and dynamic-geomechanics coupled modeling is required to properly address the risks and uncertainties such as, effect of compaction and subsidence during post-production and injection. The main subsurface uncertainties for assessing the CO2 storage potential are (i) CO2 storage capacity due to higher abandonment pressure (ii) CO2 containment due to geomechanical risks (iii) change in reservoir properties due to reaction of reservoir rock with injected CO2. These uncertainties have been addressed by first building the compositional dynamic model adequately history matched to the production data, and then coupling with geomechanical model and geochemical module during the CO2 injection phase. This is to further study on the trapping mechanisms, caprock integrity, compaction-subsidence implication towards maximum storage capacity and injectivity. The initial standalone dynamic modeling poses few challenges to match the water production in the field due to presence of karsts, extent of a baffle zone between the aquifer and producing zones and uncertainty in the aquifer volume. The overall depletion should be matched, since the field abandonment pressure impacts the CO2 injectivity and storage capacity. A reasonably history matched coupled dynamic-geomechanical model is used as base case for simulating CO2 injection. The dynamic-geomechanical coupling is done with 8 stress steps based on critical pressure changes throughout production and CO2 injection phase. Overburden and reservoir properties has been mapped in Geomechanical grid and was run using two difference constitutive model; Mohr's Coulomb and Modified Cam Clay respectively. The results are then calibrated with real subsidence measurement at platform location. This coupled model has been used to predict the maximum CO2 injection rate of 100 MMscf/d/well and a storage capacity of 1.34 Tscf. The model allows to best design the injection program in terms of well location, target injection zone and surface facilities design. This coupled modeling study is used to mature the field as a viable storage site. The established workflow starting from static model to coupled model to forecasting can be replicated in other similar projects to ensure the subsurface robustness, reduce uncertainty and risk mitigation of the field for CO2 storage site.