A GEOMETRICAL SURFACE TEXTURE STUDY OF CYCLOID DRIVE DISCS AFTER BENCH TESTS

Abstract

The article presents the results of a geometrical surface texture study of cycloid drive discs after bench tests. For this purpose, the working surfaces, such as peak and valley areas of the epicycloid and the holes inner surfaces of both discs, were investigated using contact profilometry. From each surface, a transverse profiles were extracted, before and after 50 cycles of bench test. The discs and the profiles were examined for signs of wear and roughness changes. For each profile, the Ra and Rz roughness parameters were determined. On the base of the obtained profiles and the values of roughness parameters, it can be stated that the assumed test parameters provide stable working conditions, with an uninterrupted lubrication film, which results in practically negligible and unmeasurable wear. Taking into account the operating specification of a helicopter winch as an example of potential application of the presented cycloidal drive, the developed solution fulfils the requirements concerning wear resistance.