Controlled Pyrolysis of Waste TV Housing Plastic Added Brominated Flame Retardants

2011 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring Pub Date : 2011-04-11 DOI:10.1109/CDCIEM.2011.190

Peng Shaohong, Huang Yan, Chen Lie-qiang, Xie Ming-quan, Huang Huajie, Liang Chao, Li Liu-bin

引用次数: 2

Abstract

The thermal stability and degradation kinetic of TV set housing plastic were investigated by the means of thermo gravimetric analyzer, the experiments of separating bromine were carried with a bench-scale pyrolysis reactor. The study results showed that the weight loss curve of TV housing plastic was divided into two different stages, the thermal degradation of brominated flame retardants mainly occurred at 290¡æ~ 350¡æ, the HIPS resin mainly occurred at 350¡æ~ 455¡æ. The most of bromine can be first released from the TV housing plastic by a process of isothermal treatment(about 300¡æ) and vacuum (

查看原文本刊更多论文

添加溴化阻燃剂的废电视外壳塑料控制热解研究

采用热重分析仪对电视机外壳塑料的热稳定性和降解动力学进行了研究，并在台式热解反应器上进行了溴分离实验。研究结果表明，电视外壳塑料的失重曲线分为两个不同的阶段，溴化阻燃剂的热降解主要发生在290℃~ 350℃，HIPS树脂主要发生在350℃~ 455℃。通过等温处理(约300℃)和真空处理(

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2011 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring

自引率

0.00%

发文量