Increasing the Productivity of Horizontal Wells Through Multistage Hydraulic Fracturing Using a Working Fluid Based on a New Biopolymer System

Abstract

According to the US Energy Agency (EIA), Russia is the world leader in terms of the volume of technically recoverable "tight oil" resources (U.S. Department of Energy, 2013). To convert them into commercial production, it is necessary to create cost-effective development technologies. For this purpose, a strategy has been adopted, which is implemented at the state level and one of the key elements of which is the development of the high-tech service market. In 2017, the Minister of Energy of the Russian Federation, in accordance with a government executive order (Government Executive Order of the Russian Federation, 2014), awarded the Gazprom Neft project on the creation of a complex of domestic technologies and high-tech equipment for developing the Bazhenov formation with the national status. It is implemented in several directions and covers a wide range of technologies required for the horizontal wells drilling and stimulating flows from them using multi-stage hydraulic fracturing (MS HF) methods. Within the framework of the technological experiment implemented at the Palyanovskaya area at the Krasnoleninskoye field by the Industrial Integration Center "Gazpromneft - Technological Partnerships" (a subsidiary of Gazprom Neft), from 2015 to 2020, 29 high-tech wells with different lengths of horizontal wellbore were constructed, and multistage hydraulic fracturing operations were performed with various designs. Upon results of 2020, it became possible to increase annual oil production from the Bazhenov formation by 78 % in comparison with up to 100,000 tons in 2019. The advancing of development technologies allowed the enterprise to decrease for more than twice the cost of the Bazhenov oil production from 30 thousand rubles per ton (69$/bbl) at the start of the project in 2015 to 13 thousand rubles (24$/bbl) in 2020. A significant contribution to the increase in production in 2020 was made by horizontal wells, where MS HF operations were carried out using an experimental process fluid, which is based on the modified Si Bioxan biopolymer. This article is devoted to the background of this experiment and the analysis of its results.