Numerical investigations of flow in nuclear fuel assembly with spacer grid and OpenFOAM validation

Abstract

Abstract Spacer grids with mixing vanes have complex geometry and are used to support the fuel rods in nuclear fuel assemblies as well as to improve heat transfer by generating turbulence downstream of the spacer grid in the cores of the pressurized water reactors. To validate the CFD code OpenFOAM for relevant spacer grid geometries, numerical analyses on the OECD/NEA MATiS-H benchmark were performed. The flow behind two different types of spacer grid designs was analysed: split- and swirl-type. Initially, an appropriate inlet velocity profile was generated. In a next step, Computer-Aided Design models of the spacer grids were prepared and then meshed using ANSYS Mesher 19.2. Transient URANS simulations were performed with the k-ω-SST turbulence model and the results were compared with data. Good agreement was obtained for the mean velocity profile and the vorticity in the swirl-type configuration, while the numerical results slightly overestimated the transverse velocity profile at some measurements locations of the split-type configuration. The content of this article was initially presented at the 33rd German CFD Network of Competence Meeting, held on March 22–23 at GRS in Garching, Germany.