The impact of additives applied to the lubricant on the burnishing process and tribological properties

Q3 Chemical Engineering

International Journal of Applied Mechanics and Engineering Pub Date : 2023-06-28 DOI:10.59441/ijame/168937

K. Adamczuk, D. Dębowski, S. Wojciechowski, D. Kozak, Miłosz Zabłocki

{"title":"The impact of additives applied to the lubricant on the burnishing process and tribological properties","authors":"K. Adamczuk, D. Dębowski, S. Wojciechowski, D. Kozak, Miłosz Zabłocki","doi":"10.59441/ijame/168937","DOIUrl":null,"url":null,"abstract":"The aim of this study was to determine the impact of additions of tungsten carbide and silicon carbide microparticles to the lubricant used in the burnishing process on the tribological properties of friction pairs. The cylinders made of AISI 1045 steel constituted a workpiece. Burnishing was made with a lubricant the SN150 base oil with addition of tungsten carbide and silicon carbide microparticles. The tested materials were burnished with forces of 1000 N and 1500 N. Before and after the burnishing process, the surface roughness and hardness of the tested materials were measured. The study also presents the results of tribological properties of friction pairs with the tested structural materials. It was found that the addition of tungsten carbide microparticles to the base oil in the burnishing process can result in improved surface quality and reduced surface roughness. The results also confirmed the effect of addition of tungsten carbide and silicon carbide to the lubricant used in the burnishing process on tribological properties.","PeriodicalId":37871,"journal":{"name":"International Journal of Applied Mechanics and Engineering","volume":"42 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-06-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Applied Mechanics and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.59441/ijame/168937","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Chemical Engineering","Score":null,"Total":0}

引用次数: 0

Abstract

The aim of this study was to determine the impact of additions of tungsten carbide and silicon carbide microparticles to the lubricant used in the burnishing process on the tribological properties of friction pairs. The cylinders made of AISI 1045 steel constituted a workpiece. Burnishing was made with a lubricant the SN150 base oil with addition of tungsten carbide and silicon carbide microparticles. The tested materials were burnished with forces of 1000 N and 1500 N. Before and after the burnishing process, the surface roughness and hardness of the tested materials were measured. The study also presents the results of tribological properties of friction pairs with the tested structural materials. It was found that the addition of tungsten carbide microparticles to the base oil in the burnishing process can result in improved surface quality and reduced surface roughness. The results also confirmed the effect of addition of tungsten carbide and silicon carbide to the lubricant used in the burnishing process on tribological properties.

查看原文本刊更多论文

润滑油添加剂对抛光过程和摩擦学性能的影响

本研究的目的是确定在抛光过程中使用的润滑剂中添加碳化钨和碳化硅微粒对摩擦副摩擦学性能的影响。由AISI 1045钢制成的气缸构成一个工件。采用添加碳化钨和碳化硅微粒的SN150基础油进行抛光。在1000 N和1500 N的力下对被试材料进行抛光，并在抛光前后测量被试材料的表面粗糙度和硬度。研究还介绍了摩擦副的摩擦学性能与测试结构材料的关系。在抛光过程中，在基础油中加入碳化钨微粒可以改善表面质量，降低表面粗糙度。结果还证实了在抛光过程中添加碳化钨和碳化硅对摩擦性能的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Applied Mechanics and Engineering Engineering-Civil and Structural Engineering

CiteScore

1.50

自引率

0.00%

发文量

审稿时长

35 weeks

期刊介绍： INTERNATIONAL JOURNAL OF APPLIED MECHANICS AND ENGINEERING is an archival journal which aims to publish high quality original papers. These should encompass the best fundamental and applied science with an emphasis on their application to the highest engineering practice. The scope includes all aspects of science and engineering which have relevance to: biomechanics, elasticity, plasticity, vibrations, mechanics of structures, mechatronics, plates & shells, magnetohydrodynamics, rheology, thermodynamics, tribology, fluid dynamics.