Creep ductility and modified Monkman-Grant equation for Gr.92 by incorporating total strain

IF 1 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials at High Temperatures Pub Date : 2023-04-03 DOI:10.1080/09603409.2023.2195060

F. Abe

引用次数: 0

Abstract

ABSTRACT A modified Monkman-Grant equation, which can provide a more accurate means of predicting creep rupture life than the standard Monkman-Grant formula, has been investigated for Gr.92 using creep data in the NIMS Creep Data Sheets at 550 to 750°C. The t r versus minimum creep rate min plot, which is called the Monkman-Grant relation, deviates downward at low stresses and long times. Better correlation of the t r with the min is obtained by the replacement of t r with (t r /ε r), where ε r is the total or rupture strain. The (t r /ε r) is inversely proportional to the min over a wide range of stress, temperature and test duration, and the magnitude of data scattering is only a little bit even at low stresses and long times. The creep life of Gr.92 can be predicted by evaluating the min, together with the ε r evaluated from the stress and or min dependence.

查看原文本刊更多论文

包含总应变的Gr.92的蠕变延性和修正的Monkman-Grant方程

本文利用NIMS蠕变数据表中的蠕变数据，对Gr.92进行了研究。与标准的Monkman-Grant公式相比，修正的Monkman-Grant方程可以提供更准确的预测蠕变断裂寿命的方法。在低应力和长时间条件下，tr与最小蠕变速率最小图(称为Monkman-Grant关系)向下偏离。用(t r /ε r)代替tr可以得到tr与最小应变的更好的相关性，其中ε r为总应变或断裂应变。在较宽的应力、温度和测试时间范围内，(t r /ε r)与最小值成反比，即使在低应力和长时间下，数据散射的幅度也很小。Gr.92的蠕变寿命可以通过求最小值和由应力和最小依赖关系求出的ε r来预测。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Materials at High Temperatures 工程技术-材料科学：综合

CiteScore

1.90

自引率

15.40%

发文量

审稿时长

>12 weeks

期刊介绍： Materials at High Temperatures welcomes contributions relating to high temperature applications in the energy generation, aerospace, chemical and process industries. The effects of high temperatures and extreme environments on the corrosion and oxidation, fatigue, creep, strength and wear of metallic alloys, ceramics, intermetallics, and refractory and composite materials relative to these industries are covered. Papers on the modelling of behaviour and life prediction are also welcome, provided these are validated by experimental data and explicitly linked to actual or potential applications. Contributions addressing the needs of designers and engineers (e.g. standards and codes of practice) relative to the areas of interest of this journal also fall within the scope. The term ''high temperatures'' refers to the subsequent temperatures of application and not, for example, to those of processing itself. Materials at High Temperatures publishes regular thematic issues on topics of current interest. Proposals for issues are welcomed; please contact one of the Editors with details.