Contact Resistance Characteristics of Elastomeric Complex Structure Contacts for Gold and Tin Printed Circuit Board

Abstract

Characteristics of conductive elastomer which is composed of silicone rubber and dispersed carbon black particles shows conductive and elastic properties in one simple material. This material has been widely applied to contacts of switches and connectors of a liquid crystal panels. However, since surface state of the contact is very soft, it is difficult to remove contaminant films of contaminated opposite side contact surface and to obtain low contact resistance owing to break the film. This study has been conducted to clear structures of the elastomer which indicates removal characteristics for contaminant films and low contact resistance. As specimens, six different types of the elastomer contacts composed by different type of dispersed such materials as carbon and metal fibers, metal mesh, and plated surfaces were used. The opposite contacts were Au and Sn plated contact surface on a printed circuit board (PCB). The elastomeric contacts contained hard materials showed lower contact resistance than only dispersed carbon particles in the elastomer matrix for both contaminated PCB contact surfaces.