Temperature Dependence of Fatigue Crack Growth in Low-Alloy Steel Under Gaseous Hydrogen

O. Takakuwa, S. Matsuoka, S. Okazaki, M. Yoshikawa, J. Yamabe, H. Matsunaga
{"title":"Temperature Dependence of Fatigue Crack Growth in Low-Alloy Steel Under Gaseous Hydrogen","authors":"O. Takakuwa, S. Matsuoka, S. Okazaki, M. Yoshikawa, J. Yamabe, H. Matsunaga","doi":"10.1115/PVP2018-84438","DOIUrl":null,"url":null,"abstract":"In order to elucidate the temperature dependence of hydrogen-enhanced fatigue crack growth (FCG), the FCG test was performed on low-alloy Cr-Mo steel JIS-SCM435 according to ASTM E647 using compact tension (CT) specimen under 0.1–95 MPa hydrogen-gas at temperature ranging from room temperature (298 K) to 423 K. The obtained results were interpreted according to trap site occupancy under thermal equilibrium state. The FCG was significantly accelerated at RT under hydrogen-gas, that its maximum acceleration rate of the FCG was 15 at the pressure of 95 MPa at the temperature of 298 K. The hydrogen-enhanced FCG was mitigated due to temperature elevation for all pressure conditions. The trap site with binding energy of 44 kJ/mol dominated the temperature dependence of hydrogen-enhanced FCG, corresponding approximately to binding energy of dislocation core. The trap site (dislocation) occupancy is decreased with the temperature elevation, resulting in the mitigation of the FCG acceleration. On the basis of the obtained results, when the occupancy becomes higher at lower temperature, e.g. 298 K, hydrogen-enhanced FCG becomes more pronounced. The lower occupancy at higher temperature does the opposite.","PeriodicalId":23651,"journal":{"name":"Volume 6B: Materials and Fabrication","volume":"28 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Volume 6B: Materials and Fabrication","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1115/PVP2018-84438","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In order to elucidate the temperature dependence of hydrogen-enhanced fatigue crack growth (FCG), the FCG test was performed on low-alloy Cr-Mo steel JIS-SCM435 according to ASTM E647 using compact tension (CT) specimen under 0.1–95 MPa hydrogen-gas at temperature ranging from room temperature (298 K) to 423 K. The obtained results were interpreted according to trap site occupancy under thermal equilibrium state. The FCG was significantly accelerated at RT under hydrogen-gas, that its maximum acceleration rate of the FCG was 15 at the pressure of 95 MPa at the temperature of 298 K. The hydrogen-enhanced FCG was mitigated due to temperature elevation for all pressure conditions. The trap site with binding energy of 44 kJ/mol dominated the temperature dependence of hydrogen-enhanced FCG, corresponding approximately to binding energy of dislocation core. The trap site (dislocation) occupancy is decreased with the temperature elevation, resulting in the mitigation of the FCG acceleration. On the basis of the obtained results, when the occupancy becomes higher at lower temperature, e.g. 298 K, hydrogen-enhanced FCG becomes more pronounced. The lower occupancy at higher temperature does the opposite.
气态氢作用下低合金钢疲劳裂纹扩展的温度依赖性
为了阐明氢增强疲劳裂纹扩展(FCG)的温度依赖性,根据ASTM E647的要求,在室温(298 K)至423 K的温度范围内,用致密拉伸(CT)试样在0.1-95 MPa的氢气条件下对低合金Cr-Mo钢JIS-SCM435进行了FCG试验。所得结果是根据热平衡状态下的陷阱位置占用来解释的。在加氢条件下,温度298 K、压力95 MPa时,FCG的最大加速速率为15。在所有压力条件下,由于温度升高,氢增强FCG得到了缓解。氢增强FCG的温度依赖性以结合能为44 kJ/mol的阱位为主,与位错核的结合能近似对应。圈闭位置(位错)占用随温度升高而减少,导致FCG加速减缓。根据得到的结果,在较低的温度下,如298 K,占用率越高,氢增强的FCG越明显。温度越高,占用率越低,反之亦然。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信