Transport of Polymers in Low Permeability Carbonate Rocks

Abstract

Polymer transport and retention affect oil recovery and economic feasibility of EOR processes. Most studies on polymer transport have focused on sandstones with permeabilities (k) higher than 200 mD. A limited number of studies were conducted in carbonates with k less than 100 mD and very few in the presence of residual oil. In this work, transport of four polymers with different molecular weights (MW) and functional groups are studied in Edwards Yellow outcrop cores (k<50 mD) with and without residual oil saturation (Sor). The retention of polymers was estimated by both the material balance method and the double-bank method. The polymer concentration was measured by both the total organic carbon (TOC) analyzer and the capillary tube rheology. Partially hydrolyzed acrylamide (HPAM) polymers exhibited high retention (> 150 μg/g), inaccessible pore volume (IPV) greater than 7%, and high residual resistance factor (>9). A sulfonated polyacrylamide (AN132), showed low retentions (< 20 μg/g) and low IPV. The residual resistance factor (RRF) of AN132 in the water-saturated rock was less than 2, indicating little blocking of pore throats in these tight rocks. The retention and RRF of the AN132 polymer increased in the presence of residual oil saturation due to partial blocking of the smaller pore throats available for polymer propagation in an oil-wet core.