Numerical Study of Flow Structures Through Horizontal Double-Layered Vegetation Consisting of Combined Submergent and Emergent Vegetations

Abstract

This study addresses the vivid internal flow structure variations through horizontal double-layered vegetation (HDLV) under subcritical flow conditions for an inland tsunami. The computational domain was built in ANSYS Workbench, while post-processing and simulation were performed using the computational fluid dynamics (CFD) tool FLUENT with the three-dimensional (3D) Reynolds stress model (RSM). Two alternative arrangements of HDLV were considered, namely Configuration 1 (short submergent layer [Formula: see text] emergent layer (Lt)) and Configuration 2 (tall emergent layer [Formula: see text] submergent layer (Ls)) along with varying flow depths. Strong inflections in velocity and Reynolds stress profiles were observed at the interface near the top of Ls, Whereas, these profiles were almost constant from bed to the top of vegetations inside Lt. A shear layer zone was formed above the top of Ls, which extended to the downstream region in Configuration 2 while it was restricted by Lt in Configuration 1. The normal Reynolds stresses at the bed were significantly greater within Ls in Configuration 2 than inside Lt in Configuration 1. Hence, Configuration 1 was performed relatively better than Configuration 2 in terms of reducing velocity within the vegetation, while Configuration 2 played a key role in attenuating the increased velocities and confining the shear layer above the short submergent layer.