A robust control for a variable wind speed conversion system energy based on a DFIG using Backstepping

IF 1.5 Q4 ENERGY & FUELS

Wind Engineering Pub Date : 2022-09-19 DOI:10.1177/0309524X221122512

H. Jenkal, M. Lamnadi, Sara Mensou, B. Bossoufi, A. Boulezhar

引用次数: 1

Abstract

This paper presents a modeling and robust control of the DFIG (doubly fed induction generator) used in the wind energy conversion system (WECS). We started by using the MPPT method to extract the maximum power in the WECS, modeling the double-fed inductor generator, and then applying the Backstepping controller to control the reactive power and electromagnetic torque in order to test the performance and the robustness of the system. All is simulated and presented in MATLAB/SIMULINK software.

查看原文本刊更多论文

基于反步法的变风速转换系统能量的鲁棒控制

本文研究了用于风能转换系统(WECS)的双馈感应发电机的建模和鲁棒控制。首先，采用MPPT方法提取wcs的最大功率，对双馈电感发电机进行建模，然后采用反步控制器对系统的无功功率和电磁转矩进行控制，以测试系统的性能和鲁棒性。在MATLAB/SIMULINK软件中进行了仿真和演示。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Wind Engineering ENERGY & FUELS-

CiteScore

4.00

自引率

13.30%

发文量

期刊介绍： Having been in continuous publication since 1977, Wind Engineering is the oldest and most authoritative English language journal devoted entirely to the technology of wind energy. Under the direction of a distinguished editor and editorial board, Wind Engineering appears bimonthly with fully refereed contributions from active figures in the field, book notices, and summaries of the more interesting papers from other sources. Papers are published in Wind Engineering on: the aerodynamics of rotors and blades; machine subsystems and components; design; test programmes; power generation and transmission; measuring and recording techniques; installations and applications; and economic, environmental and legal aspects.