Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling

Q2 Materials Science
Jinchun Zhu, Jian Zhang, Jindao Wang, Biao Wang
{"title":"Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling","authors":"Jinchun Zhu, Jian Zhang, Jindao Wang, Biao Wang","doi":"10.1080/03602559.2017.1410843","DOIUrl":null,"url":null,"abstract":"ABSTRACT A random terpolymer copolymer of styrene, acrylonitrile and glycidyl methacrylate (SAG) was used as compatibilizer to improve the interfacial adhesion of short carbon fiber (SCF)/acrylonitrile-butadiene-styrene (ABS) composites. Effects of SAG on the structural and mechanical properties of fused deposition modeling (FDM) printed composites were investigated. The results showed the addition of SAG could effectively improve the interfacial adhesion between SCF and ABS matrix, whereas slightly decrease average length of SCF and degrade the adhesion quality among deposited filaments. As a result, the tensile and flexural properties of FDM printed composites initially increased and then decreased with the SAG content. GRAPHICAL ABSTRACT","PeriodicalId":20629,"journal":{"name":"Polymer-Plastics Technology and Engineering","volume":"15 1","pages":"1576 - 1584"},"PeriodicalIF":0.0000,"publicationDate":"2018-10-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"8","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymer-Plastics Technology and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/03602559.2017.1410843","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Materials Science","Score":null,"Total":0}
引用次数: 8

Abstract

ABSTRACT A random terpolymer copolymer of styrene, acrylonitrile and glycidyl methacrylate (SAG) was used as compatibilizer to improve the interfacial adhesion of short carbon fiber (SCF)/acrylonitrile-butadiene-styrene (ABS) composites. Effects of SAG on the structural and mechanical properties of fused deposition modeling (FDM) printed composites were investigated. The results showed the addition of SAG could effectively improve the interfacial adhesion between SCF and ABS matrix, whereas slightly decrease average length of SCF and degrade the adhesion quality among deposited filaments. As a result, the tensile and flexural properties of FDM printed composites initially increased and then decreased with the SAG content. GRAPHICAL ABSTRACT
熔融沉积法制备具有增强力学性能的增容助剂SCF/ABS复合材料
摘要:采用苯乙烯、丙烯腈和甲基丙烯酸缩水甘油酯(SAG)三元共聚物作为增容剂,提高短碳纤维(SCF)/丙烯腈-丁二烯-苯乙烯(ABS)复合材料的界面附着力。研究了表面活性剂对熔融沉积建模(FDM)打印复合材料结构和力学性能的影响。结果表明,SAG的加入能有效改善SCF与ABS基体之间的界面粘附,但会略微降低SCF的平均长度,降低沉积细丝之间的粘附质量。结果表明,随着SAG含量的增加,FDM打印复合材料的拉伸和弯曲性能呈现先上升后下降的趋势。图形抽象
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Polymer-Plastics Technology and Engineering
Polymer-Plastics Technology and Engineering 工程技术-高分子科学
CiteScore
1.71
自引率
0.00%
发文量
0
审稿时长
4 months
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信