Effect of mercerization on the properties and biodegradation behavior of LDPE and LDPE/PHB hybrid composites filled with castor bean cake

IF 2.1 4区 材料科学 Q3 MATERIALS SCIENCE, COMPOSITES
Marisa Cristina Guimarães Rocha, Maira Cunha Sanches, N. I. Alvarez Acevedo, L. Bertolino
{"title":"Effect of mercerization on the properties and biodegradation behavior of LDPE and LDPE/PHB hybrid composites filled with castor bean cake","authors":"Marisa Cristina Guimarães Rocha, Maira Cunha Sanches, N. I. Alvarez Acevedo, L. Bertolino","doi":"10.1080/14658011.2023.2207060","DOIUrl":null,"url":null,"abstract":"ABSTRACT The aim of this study is to evaluate the effect of mercerization of castor cake on the tensile and biodegradation behaviour of LDPE and LDPE/PHB composites. Polymer composites filled with raw castor cake (CC) and castor cake treated with 5% NaOH solution (MCC) were developed and the tensile and biodegradation behaviour of the materials obtained were evaluated. The incorporation of mercerized fibers to polymeric matrices generated materials with an elastic modulus superior to that of LDPE and tensile strength values close to that of LDPE. The biodegradation rates of the polymer composites increased the addition of fibers. However, alkali-treated fibres had a less pronounced effect biodegradation rates of the polimeric composites, due to the lower tendency of mercerized fibers to absorb water. The 85/10/5 LDPE/PHB/CC composite showed greater mass loss, 3.1%, than the 85/10/5 LDPE/PHB/ MCC composite, respectively, 0.9%, in 180 days.","PeriodicalId":20245,"journal":{"name":"Plastics, Rubber and Composites","volume":"242 1","pages":"356 - 363"},"PeriodicalIF":2.1000,"publicationDate":"2023-05-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Plastics, Rubber and Composites","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/14658011.2023.2207060","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, COMPOSITES","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACT The aim of this study is to evaluate the effect of mercerization of castor cake on the tensile and biodegradation behaviour of LDPE and LDPE/PHB composites. Polymer composites filled with raw castor cake (CC) and castor cake treated with 5% NaOH solution (MCC) were developed and the tensile and biodegradation behaviour of the materials obtained were evaluated. The incorporation of mercerized fibers to polymeric matrices generated materials with an elastic modulus superior to that of LDPE and tensile strength values close to that of LDPE. The biodegradation rates of the polymer composites increased the addition of fibers. However, alkali-treated fibres had a less pronounced effect biodegradation rates of the polimeric composites, due to the lower tendency of mercerized fibers to absorb water. The 85/10/5 LDPE/PHB/CC composite showed greater mass loss, 3.1%, than the 85/10/5 LDPE/PHB/ MCC composite, respectively, 0.9%, in 180 days.
丝光处理对蓖麻豆饼填充LDPE及LDPE/PHB杂化复合材料性能及生物降解行为的影响
摘要本研究的目的是评价蓖麻饼丝光处理对LDPE和LDPE/PHB复合材料拉伸和生物降解性能的影响。制备了以生蓖麻饼(CC)和经5% NaOH溶液(MCC)处理的蓖麻饼为填料的聚合物复合材料,并对材料的拉伸性能和生物降解性能进行了评价。经丝光处理的纤维掺入聚合物基体后,得到的材料弹性模量优于LDPE,抗拉强度接近LDPE。聚合物复合材料的生物降解率随着纤维添加量的增加而提高。然而,碱处理的纤维对聚合物复合材料的生物降解率的影响不太明显,因为丝光纤维吸水倾向较低。在180 d内,85/10/5 LDPE/PHB/CC复合材料的质量损失率为3.1%,高于85/10/5 LDPE/PHB/ MCC复合材料的0.9%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Plastics, Rubber and Composites
Plastics, Rubber and Composites 工程技术-材料科学:复合
CiteScore
4.10
自引率
0.00%
发文量
24
审稿时长
4 months
期刊介绍: Plastics, Rubber and Composites: Macromolecular Engineering provides an international forum for the publication of original, peer-reviewed research on the macromolecular engineering of polymeric and related materials and polymer matrix composites. Modern polymer processing is increasingly focused on macromolecular engineering: the manipulation of structure at the molecular scale to control properties and fitness for purpose of the final component. Intimately linked to this are the objectives of predicting properties in the context of an optimised design and of establishing robust processing routes and process control systems allowing the desired properties to be achieved reliably.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信