A fusion technology demonstration facility (TDF)

Nuclear engineering and design/fusion : an international journal devoted to the thermal, mechanical, materials, structural, and design problems of fusion energy Pub Date : 1985-01-01 DOI:10.1016/0167-899X(85)90014-X

J.N. Doggett, B.G. Logan, J.E. Osher, K.I. Thomassen, W.D. Nelson

引用次数: 6

Abstract

This paper describes a facility for generating engineering data on the nuclear technologies needed to build an engineering test reactor (ETR). The facility, based on a tandem mirror operating in the Kelley mode, could be used to produce a high neutron flux (1.4 MW/m²) on an 8 m² test area for testing fusion blankets. Runs of more than 100 hours, with an average availability of 30%, would produce a fluence of 5 MW·yr/m² and give the necessary experience for successful operation of an ETR.

查看原文本刊更多论文

聚变技术示范设施(TDF)

本文描述了一种用于生成建造工程试验堆(ETR)所需的核技术工程数据的设备。该设施基于在凯利模式下运行的串联反射镜，可用于在8平方米的测试区域内产生高中子通量(1.4 MW/m2)，用于测试聚变毯。运行超过100小时，平均利用率为30%，将产生5 MW·yr/m2的影响，并为ETR的成功运行提供必要的经验。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Nuclear engineering and design/fusion : an international journal devoted to the thermal, mechanical, materials, structural, and design problems of fusion energy

自引率

0.00%

发文量