Dual-polarized Fixed-frequency Beam Scanning Leaky-wave Antenna for 5G Communication

IF 0.6 4区计算机科学 Q4 ENGINEERING, ELECTRICAL & ELECTRONIC

Applied Computational Electromagnetics Society Journal Pub Date : 2021-01-01 DOI:10.47037/2021.aces.j.360706

H. Li, Y. Zhou

引用次数: 2

Abstract

A low profile and dual-polarized fixed-frequency beam scanning leaky wave antenna for 5G communication is presented, which is based on a corrugated microstrip line (CML) called spoof surface plasmons transmission line. The antenna radiates horizontally polarized electromagnetic wave and vertically polarized electromagnetic wave using two different periodic antennas elements. The fabricated antenna is measured and the results show that the operating frequency of the antenna is 3.4-3.7 GHz. The measured main beam angle scans from -9° to -30°. The measured gain is from 8.3 dB to 9.7 dB over the working band.

查看原文本刊更多论文

5G通信双极化定频波束扫描漏波天线

提出了一种用于5g通信的低轮廓双极化固定频率波束扫描漏波天线，该天线基于一种称为欺骗表面等离子体传输线的波纹微带线(CML)。该天线采用两种不同的周期天线单元辐射水平极化电磁波和垂直极化电磁波。对制作的天线进行了测量，结果表明天线的工作频率为3.4 ~ 3.7 GHz。测量的主波束角扫描范围为-9°至-30°。测量到的增益在工作频带范围内从8.3 dB到9.7 dB。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Applied Computational Electromagnetics Society Journal 工程技术-电信学

CiteScore

1.60

自引率

28.60%

发文量

审稿时长

9 months

期刊介绍： The ACES Journal is devoted to the exchange of information in computational electromagnetics, to the advancement of the state of the art, and to the promotion of related technical activities. A primary objective of the information exchange is the elimination of the need to "re-invent the wheel" to solve a previously solved computational problem in electrical engineering, physics, or related fields of study. The ACES Journal welcomes original, previously unpublished papers, relating to applied computational electromagnetics. All papers are refereed. A unique feature of ACES Journal is the publication of unsuccessful efforts in applied computational electromagnetics. Publication of such material provides a means to discuss problem areas in electromagnetic modeling. Manuscripts representing an unsuccessful application or negative result in computational electromagnetics is considered for publication only if a reasonable expectation of success (and a reasonable effort) are reflected. The technical activities promoted by this publication include code validation, performance analysis, and input/output standardization; code or technique optimization and error minimization; innovations in solution technique or in data input/output; identification of new applications for electromagnetics modeling codes and techniques; integration of computational electromagnetics techniques with new computer architectures; and correlation of computational parameters with physical mechanisms.