Enhancing Photon Transfer Efficiency in Photocatalysis Using Suspended LED Lights for Water Treatment

Abstract

Photocatalysis application in water treatment has been the object of many researchers worldwide in recent decades. However, there are limited commercial applications due to low photon transfer efficiency, which create barriers leading to challenges in making the process efficient and economically feasible. Fixed UV/visible light sources, which are generally located outside the reactor or encapsulated in quartz tube inside the reactor are the source of energy to activate photocatalyst generating powerful oxidants such as electrons and holes. Suspended waterproof LED visible lights were employed to enhance photon transfer efficiency. Consequently, the required energy was lower resulting in negligible temperature increase and eliminated the need for an external cooler, no need for quartz (UV transparent) or treated glass reactors, enhanced mixing due to continuous movement of light bulbs by convective currents, and minimum/no attenuation. Direct Blue 15 (DB15) dye was used as model compound and the photocatalyst was P25 TiO2 (Average particle: 30 nm, Surface area: 50 m2 g−1). The samples taken at different time intervals were analyzed by UV-Vis. spectrophotometer (UV-3600), and TOC-V CPN total organic carbon analyzer (both from Shimadzu). It was found that for the same level of degradation, the degradation rate increased by about 50% compared to conventional fixed light photoreactor. Overall, the cost of the operation can be reduced substantially, paving the road for feasible commercialization of the process.