{"title":"Preparation of Au/ZnO/Fe3O4 Composite for Degradation of Tartrazine under Visible Light","authors":"Linh Vo Quang, Anh-Tuan Vu","doi":"10.9767/bcrec.17061","DOIUrl":null,"url":null,"abstract":"Zinc oxide has been shown to be a potential photocatalyst under UV light but its catalytic activity is limited under visible light due to its wide bandgap energy and rapid recombination of electrons and holes. Besides the catalytic recovery is a challenging issue because of its dispersion in solution. Previous work has shown that the interaction of gold nanoparticles with ZnO can reduce the band gap energy (Eg) and plasmon resonance (SPR) as well as the formation of the Schottky barrier in Au/ZnO composite can reduce the recombination of electrons and holes. In this study, Au/ZnO/Fe3O4 (AZF) composites were prepared by a simple mixing method using polyvinyl alcohol (PVA) as a binder. As-prepared composites were characterized by Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray Diffraction (XRD), UV-Vis Diffuse Reflectance (UV-Vis-DR), and Fourier Transform Infra Red (FT-IR). The catalytic efficiency of as-prepared samples was evaluated through the decomposition of tartrazine (TA), a colorant that is difficult to decompose in wastewater and has harmful effects on human health. The effects of reaction parameters such as the content of PVA, solution pH, and oxidizing agents (O2 and H2O2) on the catalytic efficiency were studied. The AZF at PVA of 0.0125 g showed the highest performance among as-prepared samples. With the presence of 12 mM H2O2 in the catalyst system, the degradation efficiency and reaction rate of TA in composite increased to 81.5% and 0.020 min−1, respectively. At this condition, photocatalysis and Fenton system catalysis occurred together. The catalytic mechanism of Tartrazine (TA) on composite was proposed and the reaction of TA was studied by the first-order kinetic model. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). ","PeriodicalId":9366,"journal":{"name":"Bulletin of Chemical Reaction Engineering & Catalysis","volume":"113 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-02-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bulletin of Chemical Reaction Engineering & Catalysis","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.9767/bcrec.17061","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Au/ZnO/Fe3O4复合材料在可见光下降解酒黄石的制备
氧化锌在紫外光下已被证明是一种潜在的光催化剂,但其在可见光下的催化活性受到限制,因为它具有宽的能带能和快速的电子和空穴复合。此外,由于其在溶液中的分散性,催化回收是一个具有挑战性的问题。先前的研究表明,金纳米颗粒与ZnO的相互作用可以降低Au/ZnO复合材料中的带隙能量(Eg)和等离子体共振(SPR),以及肖特基势垒的形成,可以减少电子和空穴的复合。本研究以聚乙烯醇(PVA)为粘结剂,采用简单的混合法制备了Au/ZnO/Fe3O4 (AZF)复合材料。采用扫描电镜(SEM)、x射线能谱(EDS)、x射线衍射(XRD)、UV-Vis漫反射(UV-Vis- dr)和傅里叶变换红外(FT-IR)对制备的复合材料进行了表征。通过对酒黄石(TA)的分解,评价了制备样品的催化效率。酒黄石是一种在废水中难以分解且对人体健康有害的着色剂。考察了PVA含量、溶液pH、氧化剂(O2和H2O2)等参数对催化效率的影响。0.0125 g时的AZF性能最好。在催化剂体系中加入12 mM H2O2时,复合材料中TA的降解效率和反应速率分别提高到81.5%和0.020 min−1。在此条件下,光催化和芬顿体系催化同时发生。提出了酒黄石(TA)对复合材料的催化机理,并用一级动力学模型对TA的反应进行了研究。版权所有©2023作者,BCREC集团出版。这是一篇基于CC BY-SA许可(https://creativecommons.org/licenses/by-sa/4.0)的开放获取文章。
本文章由计算机程序翻译,如有差异,请以英文原文为准。