Phase equilibria of the Al-Co-Er system at 400°C and 600°C

IF 0.9 4区材料科学 Q3 METALLURGY & METALLURGICAL ENGINEERING

Journal of Mining and Metallurgy Section B-Metallurgy Pub Date : 2021-01-01 DOI:10.2298/JMMB210317032Z

Ling-hong Zheng, Lina Zhang, Fen-yan Zhao, Li-zhu Liu, D. Wang, C.-J. Wu

引用次数: 1

Abstract

The 400?C and 600?C isothermal sections of the Al-Co-Er system were studied assisted with X-ray diffraction (XRD), scanning electron microscopy (SEM) and electron probe microanalysis (EPMA) techniques. 18 three-phase fields were identified in the 400?C isothermal section. The maximum solid solubilities of Al in Co3Er and Co2Er were 13.93 at.% and 16.13 at.%, respectively. Whereas the maximum solid solubilities of Co in Al2Er, Al2Er3 and AlEr2 were 6.93 at.%, 6.65 at.%, and 6.49 at.%, respectively. And the solid solution range of ? is from 22.22 at.% Al to 44.44 at.% Al. While the 600?C isothermal section included 20 three-phase fields. The maximum solid solubilities of Al in Co17Er2 and Co7Er2 were 10.17 at.% and 10.24 at.%, respectively. Whereas the maximum solid solubilities of Co in Al2Er and Al2Er3 were 3.63 at.% and 2.01 at.%, respectively.

查看原文本刊更多论文

Al-Co-Er体系在400℃和600℃时的相平衡

400年的吗?C和600?利用x射线衍射(XRD)、扫描电镜(SEM)和电子探针显微分析(EPMA)技术对Al-Co-Er体系的C等温切片进行了研究。在400?C等温切片。Al在Co3Er和Co2Er中的最大固溶度为13.93 at。%和16.13。分别为%。而Co在Al2Er、Al2Er3和AlEr2中的最大固溶度为6.93 at。%， 6.65 at。%， 6.49。分别为%。固溶体的范围是?是从22点22分开始的。到44.44。而600?C等温切片包括20个三相场。Al在Co17Er2和Co7Er2中的最大固溶度为10.17 at。%和10.24 at。分别为%。而Co在Al2Er和Al2Er3中的最大固溶度为3.63 at。%和2.01。分别为%。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Mining and Metallurgy Section B-Metallurgy 工程技术-冶金工程

CiteScore

2.00

自引率

40.00%

发文量

审稿时长

2 months

期刊介绍： University of Belgrade, Technical Faculty in Bor, has been publishing the journal called Journal of Mining and Metallurgy since 1965 and in 1997 it was divided in two independent journals dealing with mining and metallurgy separately. Since 2009 Journal of Mining and Metallurgy, Section B: Metallurgy has been accepted in Science Citation Index Expanded. Journal of Mining and Metallurgy, Section B: Metallurgy presents an international medium for the publication of contributions on original research which reflect the new progresses in theory and practice of metallurgy. The Journal covers the latest research in all aspects of metallurgy including hydrometallurgy, pyrometallurgy, electrometallurgy, transport phenomena, process control, solidification, mechanical working, solid state reactions, materials processing, surface treatment and relationships among processing, structure, and properties of materials.