Comparison of Biodiesel Extracted from Pork and Duck Fat

Q3 Chemical Engineering
Evert Michael Tarazona López, Víctor Mauricio, C. Olivera, Jhonny W. Valverde Flores, E. Alfaro, Lorgio G. Valdiviezo Gonzales
{"title":"Comparison of Biodiesel Extracted from Pork and Duck Fat","authors":"Evert Michael Tarazona López, Víctor Mauricio, C. Olivera, Jhonny W. Valverde Flores, E. Alfaro, Lorgio G. Valdiviezo Gonzales","doi":"10.3303/CET2187085","DOIUrl":null,"url":null,"abstract":"Many countries depend on energy, and it is advisable to generate energy from renewable energy sources. Pork and duck fat are residues that can be used to generate biodiesels. Thus, this research evaluated the obtaining of biodiesel from the oil extracted from pork and duck fat. For the production of biodiesel, the transesterification method was used, mixing different proportions of oil, catalyst and alcohol at a temperature of 60 °C. The results indicated that the best proportion to obtain biodiesel from pork and duck waste was 250 mL of oil, 50 mL of alcohol (methanol) and 1.5 g of catalyst (potassium hydroxide). The lower calorific value was also higher in the duck fat biodiesel (M8) with values ??of 7433 Cal/g and biodiesel from pork fat (M2) presented values ??of 7448 Cal/g. Both biodiesel obtained met the quality requirements established in ASTM D6751 standard and could be used as alternatives to common diesel.","PeriodicalId":9695,"journal":{"name":"Chemical engineering transactions","volume":"29 1","pages":"505-510"},"PeriodicalIF":0.0000,"publicationDate":"2021-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical engineering transactions","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3303/CET2187085","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Chemical Engineering","Score":null,"Total":0}
引用次数: 3

Abstract

Many countries depend on energy, and it is advisable to generate energy from renewable energy sources. Pork and duck fat are residues that can be used to generate biodiesels. Thus, this research evaluated the obtaining of biodiesel from the oil extracted from pork and duck fat. For the production of biodiesel, the transesterification method was used, mixing different proportions of oil, catalyst and alcohol at a temperature of 60 °C. The results indicated that the best proportion to obtain biodiesel from pork and duck waste was 250 mL of oil, 50 mL of alcohol (methanol) and 1.5 g of catalyst (potassium hydroxide). The lower calorific value was also higher in the duck fat biodiesel (M8) with values ??of 7433 Cal/g and biodiesel from pork fat (M2) presented values ??of 7448 Cal/g. Both biodiesel obtained met the quality requirements established in ASTM D6751 standard and could be used as alternatives to common diesel.
从猪肉和鸭油脂中提取生物柴油的比较
许多国家依赖能源,利用可再生能源发电是可取的。猪肉和鸭的脂肪是可以用来生产生物柴油的残留物。因此,本研究对从猪肉和鸭脂肪中提取的油脂制备生物柴油进行了评价。对于生物柴油的生产,采用酯交换法,在60℃的温度下,将不同比例的油、催化剂和醇混合。结果表明,以猪鸭粪为原料制备生物柴油的最佳配比为:油脂250 mL、酒精(甲醇)50 mL、催化剂(氢氧化钾)1.5 g。鸭脂生物柴油(M8)的低热值也较高,值为??7433 Cal/g和从猪油中提取生物柴油(M2)的值??7448卡/克获得的两种生物柴油均符合ASTM D6751标准的质量要求,可作为普通柴油的替代品。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Chemical engineering transactions
Chemical engineering transactions Chemical Engineering-Chemical Engineering (all)
CiteScore
1.40
自引率
0.00%
发文量
0
审稿时长
6 weeks
期刊介绍: Chemical Engineering Transactions (CET) aims to be a leading international journal for publication of original research and review articles in chemical, process, and environmental engineering. CET begin in 2002 as a vehicle for publication of high-quality papers in chemical engineering, connected with leading international conferences. In 2014, CET opened a new era as an internationally-recognised journal. Articles containing original research results, covering any aspect from molecular phenomena through to industrial case studies and design, with a strong influence of chemical engineering methodologies and ethos are particularly welcome. We encourage state-of-the-art contributions relating to the future of industrial processing, sustainable design, as well as transdisciplinary research that goes beyond the conventional bounds of chemical engineering. Short reviews on hot topics, emerging technologies, and other areas of high interest should highlight unsolved challenges and provide clear directions for future research. The journal publishes periodically with approximately 6 volumes per year. Core topic areas: -Batch processing- Biotechnology- Circular economy and integration- Environmental engineering- Fluid flow and fluid mechanics- Green materials and processing- Heat and mass transfer- Innovation engineering- Life cycle analysis and optimisation- Modelling and simulation- Operations and supply chain management- Particle technology- Process dynamics, flexibility, and control- Process integration and design- Process intensification and optimisation- Process safety- Product development- Reaction engineering- Renewable energy- Separation processes- Smart industry, city, and agriculture- Sustainability- Systems engineering- Thermodynamic- Waste minimisation, processing and management- Water and wastewater engineering
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信