DESIGN AND CALIBRATION OF THE SYSTEM SUPERVISING BELT TENSION AND WEAR IN AN INDUSTRIAL FEEDER

IF 10.1 2区工程技术 Q1 ENGINEERING, MECHANICAL

Facta Universitatis-Series Mechanical Engineering Pub Date : 2022-04-08 DOI:10.22190/fume201004026r

T. Ryba, M. Rucki, Z. Siemiątkowski, Damian Bzinkowski, Michał Solecki

引用次数: 2

Abstract

In the paper, the issue of the supervision of belt tension and wear in industrial feeder is addressed. The designed system is based on strain gauges that are built into the roller and are subject to the belt pressure at each revolution. In order to assess the effectiveness of this system, calibration and uncertainty analysis was performed. As a result, it was demonstrated that the main source of uncertainty was the function of approximation, while the others were orders of magnitude smaller. The final function provided results with accuracy of ca. 10% of actually measured value, which was assumed to be a good result for this particular industrial application.

查看原文本刊更多论文

工业给料机皮带张力与磨损监测系统的设计与标定

本文对工业给料机皮带张力和磨损的监测问题进行了研究。所设计的系统是基于应变计内置于滚轮，并受到皮带压力在每一圈。为了评估该系统的有效性，进行了校准和不确定度分析。结果表明，不确定性的主要来源是近似函数，而其他来源则小几个数量级。最终函数提供的结果精度约为实际测量值的10%，对于这种特定的工业应用来说，这被认为是一个很好的结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Facta Universitatis-Series Mechanical Engineering ENGINEERING, MECHANICAL-

CiteScore

14.40

自引率

2.50%

发文量

审稿时长

6 weeks

期刊介绍： Facta Universitatis, Series: Mechanical Engineering (FU Mech Eng) is an open-access, peer-reviewed international journal published by the University of Niš in the Republic of Serbia. It publishes high-quality, refereed papers three times a year, encompassing original theoretical and/or practice-oriented research as well as extended versions of previously published conference papers. The journal's scope covers the entire spectrum of Mechanical Engineering. Papers undergo rigorous peer review to ensure originality, relevance, and readability, maintaining high publication standards while offering a timely, comprehensive, and balanced review process.