Bulk Mechanical Properties Testing of Metallic Marginal Glass Formers

Abstract

We developed a unique three-point bend testing apparatus to measure bulk mechanical properties of a model metallic glass alloy (SAM2X5 with nominal composition Fe49.7Cr17.1Mn1.9Mo7.4W1.6B15.2C3.8Si2.4) prepared by spark plasma sintering. The relatively large sample sizes in the present work allowed for the preparation of test specimens with a macroscale cross section (in the millimeter range) with well-controlled sample dimensions closer to standardized tests. Wire saw cutting allowed for a relatively sharp notch radius (3x smaller than previous studies) and minimal sample damage. We determined that Young’s modulus and notch fracture toughness measured by our three-point bending apparatus are 230 GPa and 4.9 MPam1/2. Also, Vickers indentation and flexure testing provided consistent results for Young’s modulus. Indentation fracture toughness measured by Vickers indentation produced values at least 50% lower than by flexure. The microscale mechanical properties testing technique presented in this work and subsequent analyses are applicable to specimens of other compositions or ones prepared by other methods.