Doppo Matsubara, Y. Wakashima, Yasushi Fujisawa, H. Shimizu, A. Kitamori, K. Ishikawa
{"title":"Tightening Torque Calculation Method for Plastic Clamp Force of Bolted Timber Joints","authors":"Doppo Matsubara, Y. Wakashima, Yasushi Fujisawa, H. Shimizu, A. Kitamori, K. Ishikawa","doi":"10.2488/JWRS.63.162","DOIUrl":null,"url":null,"abstract":"A method for calculating plastic clamp force from tightening torque was presented by considering a bi-linear model obtained from experimental tightening torque-clamp force relationships. The practical applicability of the calculation method was verified by tightening tests of (cid:9479)(cid:9526)(cid:9533)(cid:9524)(cid:9528)(cid:9523)(cid:9521)(cid:9513)(cid:9526)(cid:9517)(cid:9509)(cid:9444)(cid:9518)(cid:9509)(cid:9524)(cid:9523)(cid:9522)(cid:9517)(cid:9511)(cid:9509)−bolted joints using metal washers of various sizes. Results were as follows : It was found that a ratio of side-length (diameter) to thickness of metal washers ranging from 7.8 to 16.0 did not affect the torque coefficient. In addition, the ratio of maximum plastic torque coefficient to maximum elastic torque coefficient, γ max and the ratio of minimum plastic torque coefficient to minimum elastic torque coefficient, γ min , which are elements of the calculation method, tended to increase depending on embedment into timber of metal washers in side-length (diameter) to thickness ratios of 10.0 (washer size : 32×t 3.2 mm), 10.9 (washer size : 35×t","PeriodicalId":17248,"journal":{"name":"Journal of the Japan Wood Research Society","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2017-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of the Japan Wood Research Society","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2488/JWRS.63.162","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6
Abstract
A method for calculating plastic clamp force from tightening torque was presented by considering a bi-linear model obtained from experimental tightening torque-clamp force relationships. The practical applicability of the calculation method was verified by tightening tests of (cid:9479)(cid:9526)(cid:9533)(cid:9524)(cid:9528)(cid:9523)(cid:9521)(cid:9513)(cid:9526)(cid:9517)(cid:9509)(cid:9444)(cid:9518)(cid:9509)(cid:9524)(cid:9523)(cid:9522)(cid:9517)(cid:9511)(cid:9509)−bolted joints using metal washers of various sizes. Results were as follows : It was found that a ratio of side-length (diameter) to thickness of metal washers ranging from 7.8 to 16.0 did not affect the torque coefficient. In addition, the ratio of maximum plastic torque coefficient to maximum elastic torque coefficient, γ max and the ratio of minimum plastic torque coefficient to minimum elastic torque coefficient, γ min , which are elements of the calculation method, tended to increase depending on embedment into timber of metal washers in side-length (diameter) to thickness ratios of 10.0 (washer size : 32×t 3.2 mm), 10.9 (washer size : 35×t